lkml.org 
[lkml]   [2021]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH net-next 1/4] dt-bindings: dmaengine: bam_dma: Add remote power collapse mode
On Thu, Jul 29, 2021 at 01:36:31PM -0600, Rob Herring wrote:
> On Mon, Jul 19, 2021 at 04:53:14PM +0200, Stephan Gerhold wrote:
> > In some configurations, the BAM DMA controller is set up by a remote
> > processor and the local processor can simply start making use of it
> > without setting up the BAM. This is already supported using the
> > "qcom,controlled-remotely" property.
> >
> > However, for some reason another possible configuration is that the
> > remote processor is responsible for powering up the BAM, but we are
> > still responsible for initializing it (e.g. resetting it etc). Add
> > a "qcom,remote-power-collapse" property to describe that configuration.
> >
> > Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> > ---
> > NOTE: This is *not* a compile-time requirement for the BAM-DMUX driver
> > so this could also go through the dmaengine tree.
> >
> > Also note that there is an ongoing effort to convert these bindings
> > to DT schema but sadly there were not any updates for a while. :/
> > https://lore.kernel.org/linux-arm-msm/20210519143700.27392-2-bhupesh.sharma@linaro.org/
> > ---
> > Documentation/devicetree/bindings/dma/qcom_bam_dma.txt | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> > index cf5b9e44432c..362a4f0905a8 100644
> > --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> > +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> > @@ -15,6 +15,8 @@ Required properties:
> > the secure world.
> > - qcom,controlled-remotely : optional, indicates that the bam is controlled by
> > remote proccessor i.e. execution environment.
> > +- qcom,remote-power-collapse : optional, indicates that the bam is powered up by
> > + a remote processor but must be initialized by the local processor.
>
> Wouldn't 'qcom,remote-power' or 'qcom,remote-powered' be sufficient? I
> don't understand what 'collapse' means here. Doesn't sound good though.
>

Yeah I can't think of any significant meaning of the "collapse" part
for the bindings, I probably just picked it up somewhere while trying to
find some information about how the BAM DMUX setup works. :)

Just one question, would you prefer "qcom,remote-powered" or rather
"qcom,powered-remotely" for consistency with the existing
"qcom,controlled-remotely"? Both sounds fine to me.

Thanks!
Stephan

\
 
 \ /
  Last update: 2021-07-29 21:53    [W:0.096 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site