lkml.org 
[lkml]   [2021]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 01/17] dt-bindings: qcom-bam: Convert binding to YAML
On Thu, Jun 3, 2021 at 9:27 PM Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote:
>
> Hello Rob,
>
> Thanks for the review and sorry for the late reply.
>
> On Fri, 21 May 2021 at 07:13, Rob Herring <robh@kernel.org> wrote:
> >
> > On Wed, May 19, 2021 at 08:06:44PM +0530, Bhupesh Sharma wrote:
> > > Convert Qualcomm BAM DMA devicetree binding to YAML.
> > >
> > > Cc: Thara Gopinath <thara.gopinath@linaro.org>
> > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > Cc: Rob Herring <robh+dt@kernel.org>
> > > Cc: Andy Gross <agross@kernel.org>
> > > Cc: Herbert Xu <herbert@gondor.apana.org.au>
> > > Cc: David S. Miller <davem@davemloft.net>
> > > Cc: Stephen Boyd <sboyd@kernel.org>
> > > Cc: Michael Turquette <mturquette@baylibre.com>
> > > Cc: Vinod Koul <vkoul@kernel.org>
> > > Cc: dmaengine@vger.kernel.org
> > > Cc: linux-clk@vger.kernel.org
> > > Cc: linux-crypto@vger.kernel.org
> > > Cc: devicetree@vger.kernel.org
> > > Cc: linux-kernel@vger.kernel.org
> > > Cc: bhupesh.linux@gmail.com
> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > > ---
> > > .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ----------
> > > .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++
> > > 2 files changed, 91 insertions(+), 50 deletions(-)
> > > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> > > create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> > > deleted file mode 100644
> > > index cf5b9e44432c..000000000000
> > > --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> > > +++ /dev/null
> > > @@ -1,50 +0,0 @@
> > > -QCOM BAM DMA controller
> > > -
> > > -Required properties:
> > > -- compatible: must be one of the following:
> > > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
> > > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
> > > - * "qcom,bam-v1.7.0" for MSM8916
> > > -- reg: Address range for DMA registers
> > > -- interrupts: Should contain the one interrupt shared by all channels
> > > -- #dma-cells: must be <1>, the cell in the dmas property of the client device
> > > - represents the channel number
> > > -- clocks: required clock
> > > -- clock-names: must contain "bam_clk" entry
> > > -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
> > > - the secure world.
> > > -- qcom,controlled-remotely : optional, indicates that the bam is controlled by
> > > - remote proccessor i.e. execution environment.
> > > -- num-channels : optional, indicates supported number of DMA channels in a
> > > - remotely controlled bam.
> > > -- qcom,num-ees : optional, indicates supported number of Execution Environments
> > > - in a remotely controlled bam.
> > > -
> > > -Example:
> > > -
> > > - uart-bam: dma@f9984000 = {
> > > - compatible = "qcom,bam-v1.4.0";
> > > - reg = <0xf9984000 0x15000>;
> > > - interrupts = <0 94 0>;
> > > - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> > > - clock-names = "bam_clk";
> > > - #dma-cells = <1>;
> > > - qcom,ee = <0>;
> > > - };
> > > -
> > > -DMA clients must use the format described in the dma.txt file, using a two cell
> > > -specifier for each channel.
> > > -
> > > -Example:
> > > - serial@f991e000 {
> > > - compatible = "qcom,msm-uart";
> > > - reg = <0xf991e000 0x1000>
> > > - <0xf9944000 0x19000>;
> > > - interrupts = <0 108 0>;
> > > - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
> > > - <&gcc GCC_BLSP1_AHB_CLK>;
> > > - clock-names = "core", "iface";
> > > -
> > > - dmas = <&uart-bam 0>, <&uart-bam 1>;
> > > - dma-names = "rx", "tx";
> > > - };
> > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
> > > new file mode 100644
> > > index 000000000000..173e4d7508a6
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml
> > > @@ -0,0 +1,91 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: QCOM BAM DMA controller binding
> > > +
> > > +maintainers:
> > > + - Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > > +
> > > +description: |
> > > + This document defines the binding for the BAM DMA controller
> > > + found on Qualcomm parts.
> > > +
> > > +allOf:
> > > + - $ref: "dma-controller.yaml#"
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - qcom,bam-v1.4.0
> > > + - qcom,bam-v1.3.0
> > > + - qcom,bam-v1.7.0
> >
> > Can we keep the SoC association please.
>
> The original bam dma bindings are as per the underlying bam IP
> version, so I would prefer that we keep it this way for this series.
>
> Later on I can send a patchset to convert the bam DMA dt-bindings, dts
> and driver to work with 'SoC association' instead.

I just mean keep a comment with the mapping of versions to SoC:

> > > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
> > > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
> > > - * "qcom,bam-v1.7.0" for MSM8916

Otherwise, we are losing that information.

Rob

\
 
 \ /
  Last update: 2021-07-29 21:35    [W:0.185 / U:1.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site