lkml.org 
[lkml]   [2021]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1.1 1/2] PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
Date
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is inconsistent to return PCI_D0 from pci_target_state() instead
of the original target state if 'wakeup' is true and the device
cannot signal PME from D0.

This only happens when the device cannot signal PME from the original
target state and any shallower power states (including D0) and that
case is effectively equivalent to the one in which PME singaling is
not supported at all. Since the original target state is returned in
the latter case, make the function do that in the former one too.

Link: https://lore.kernel.org/linux-pm/3149540.aeNJFYEL58@kreacher/
Fixes: 666ff6f83e1d ("PCI/PM: Avoid using device_may_wakeup() for runtime PM")
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v1 -> v1.1
* Resend under a suitable subject.

---
drivers/pci/pci.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)

Index: linux-pm/drivers/pci/pci.c
===================================================================
--- linux-pm.orig/drivers/pci/pci.c
+++ linux-pm/drivers/pci/pci.c
@@ -2595,16 +2595,20 @@ static pci_power_t pci_target_state(stru
if (dev->current_state == PCI_D3cold)
target_state = PCI_D3cold;

- if (wakeup) {
+ if (wakeup && dev->pme_support) {
+ pci_power_t state = target_state;
+
/*
* Find the deepest state from which the device can generate
* PME#.
*/
- if (dev->pme_support) {
- while (target_state
- && !(dev->pme_support & (1 << target_state)))
- target_state--;
- }
+ while (state && !(dev->pme_support & (1 << state)))
+ state--;
+
+ if (state)
+ return state;
+ else if (dev->pme_support & 1)
+ return PCI_D0;
}

return target_state;


\
 
 \ /
  Last update: 2021-07-29 17:54    [W:0.079 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site