lkml.org 
[lkml]   [2021]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] nvmem: qfprom: sc7280: Handle the additional power-domains vote
Date
On sc7280, to reliably blow fuses, we need an additional vote
on max performance state of 'MX' power-domain.
Add support for power-domain performance state voting in the
driver.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/nvmem/qfprom.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 81fbad5..b5f27df 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -12,6 +12,8 @@
#include <linux/mod_devicetable.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>

@@ -139,6 +141,9 @@ static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
{
int ret;

+ dev_pm_genpd_set_performance_state(priv->dev, 0);
+ pm_runtime_put(priv->dev);
+
/*
* This may be a shared rail and may be able to run at a lower rate
* when we're not blowing fuses. At the moment, the regulator framework
@@ -212,6 +217,14 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
goto err_clk_rate_set;
}

+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->dev);
+ dev_err(priv->dev, "Failed to enable power-domain\n");
+ goto err_reg_enable;
+ }
+ dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
+
old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
writel(priv->soc_data->qfprom_blow_timer_value,
@@ -221,6 +234,8 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,

return 0;

+err_reg_enable:
+ regulator_disable(priv->vcc);
err_clk_rate_set:
clk_set_rate(priv->secclk, old->clk_rate);
err_clk_prepared:
@@ -320,6 +335,11 @@ static int qfprom_reg_read(void *context,
return 0;
}

+static void qfprom_runtime_disable(void *data)
+{
+ pm_runtime_disable(data);
+}
+
static const struct qfprom_soc_data qfprom_7_8_data = {
.accel_value = 0xD10,
.qfprom_blow_timer_value = 25,
@@ -420,6 +440,12 @@ static int qfprom_probe(struct platform_device *pdev)
econfig.reg_write = qfprom_reg_write;
}

+ ret = devm_add_action_or_reset(dev, qfprom_runtime_disable, dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(dev);
+
nvmem = devm_nvmem_register(dev, &econfig);

return PTR_ERR_OR_ZERO(nvmem);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2021-07-29 14:03    [W:0.084 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site