lkml.org 
[lkml]   [2021]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 06/19] rtc: sun6i: Add support for RTCs without external LOSCs
On Thu, Jul 29, 2021 at 04:04:10PM +0800, Icenowy Zheng wrote:
> 在 2021-06-16星期三的 11:14 +0200,Maxime Ripard写道:
> > Hi,
> >
> > On Tue, Jun 15, 2021 at 12:06:23PM +0100, Andre Przywara wrote:
> > > Some newer Allwinner RTCs (for instance the one in the H616 SoC)
> > > lack
> > > a pin for an external 32768 Hz oscillator. As a consequence, this
> > > LOSC
> > > can't be selected as the RTC clock source, and we must rely on the
> > > internal RC oscillator.
> > > To allow additions of clocks to the RTC node, add a feature bit to
> > > ignore
> > > any provided clocks for now (the current code would think this is
> > > the
> > > external LOSC). Later DTs and code can then for instance add the
> > > PLL
> > > based clock input, and older kernel won't get confused.
> > >
> > > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> >
> > Honestly, I don't really know if it's worth it at this point.
> >
> > If we sums this up:
> >
> >  - The RTC has 2 features that we use, mostly centered around 2
> >    registers set plus a global one
> >
> >  - Those 2 features are programmed in a completely different way
> >
> >  - Even the common part is different, given the discussion around the
> >    clocks that we have.
> >
> > What is there to share in that driver aside from the probe, and maybe
> > the interrupt handling? Instead of complicating this further with
> > more
> > special case that you were (rightfully) complaining about, shouldn't
> > we
> > just acknowledge the fact that it's a completely separate design and
> > should be treated as such, with a completely separate driver?
>
> I think our problem is just that we're having a single driver for both
> functionalities (clock manager and RTC).
>
> Personally I don't think we should have seperated driver for clock
> managers, although I am fine with seperated RTC driver for linear days.

Why do you think it's a bad idea to have the RTC and clocks in the same
driver?

Maxime

\
 
 \ /
  Last update: 2021-07-29 12:33    [W:0.134 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site