lkml.org 
[lkml]   [2021]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] USB: dwc2: Add OTG support for Ingenic SoCs.
On Sat, Jul 24, 2021 at 04:48:41PM +0800, 周琰杰 (Zhou Yanjie) wrote:
> Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000
> SoC, the X1600 SoC, the X1830 SoC, and the X2000 SoC. Introduce
> support for disable Ingenic overcurrent detection, once selected
> it enables GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to
> disable the VBUS overcurrent detection.
>
> This patch is derived from Dragan Čečavac (in the kernel 3.18.3
> tree of CI20). It is very useful for the MIPS Creator CI20 (r1).
> Without this patch, OTG port of CI20 has a great probability to
> face overcurrent warning, which breaks the OTG functionality.
>
> Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> ---
> drivers/usb/dwc2/core.c | 9 +++++++++
> drivers/usb/dwc2/core.h | 5 +++++
> drivers/usb/dwc2/params.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> index 272ae57..c35b2e2 100644
> --- a/drivers/usb/dwc2/core.c
> +++ b/drivers/usb/dwc2/core.c
> @@ -1153,6 +1153,7 @@ static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
> int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
> {
> u32 usbcfg;
> + u32 otgctl;
> int retval = 0;
>
> if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
> @@ -1187,6 +1188,14 @@ int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
> dwc2_writel(hsotg, usbcfg, GUSBCFG);
> }
>
> + if (hsotg->params.deactivate_ingenic_overcurrent_detection) {
> + if (dwc2_is_host_mode(hsotg)) {
> + otgctl = readl(hsotg->regs + GOTGCTL);
> + otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
> + writel(otgctl, hsotg->regs + GOTGCTL);
> + }
> + }
> +
> return retval;
> }
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index ab6b815..e026d13 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -418,6 +418,10 @@ enum dwc2_ep0_state {
> * detection using GGPIO register.
> * 0 - Deactivate the external level detection (default)
> * 1 - Activate the external level detection
> + * @deactivate_ingenic_overcurrent_detection: Deactivate Ingenic overcurrent
> + * detection.
> + * 0 - Activate the overcurrent detection (default)

Having 0 as "active" is rough to handle over time.

All of the other options are "activate", so please, keep them the same
if at all possible.

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-07-27 16:28    [W:0.552 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site