lkml.org 
[lkml]   [2021]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 8/8] KVM: x86: hyper-v: Deactivate APICv only when AutoEOI feature is in use
From
Date
On Thu, 2021-07-22 at 19:06 +0000, Sean Christopherson wrote:
> +Ben
>
> On Thu, Jul 22, 2021, Maxim Levitsky wrote:
> > On Mon, 2021-07-19 at 18:49 +0000, Sean Christopherson wrote:
> > > On Sun, Jul 18, 2021, Maxim Levitsky wrote:
> > > > I am more inclined to fix this by just tracking if we hold the srcu
> > > > lock on each VCPU manually, just as we track the srcu index anyway,
> > > > and then kvm_request_apicv_update can use this to drop the srcu
> > > > lock when needed.
> > >
> > > The entire approach of dynamically adding/removing the memslot seems doomed to
> > > failure, and is likely responsible for the performance issues with AVIC, e.g. a
> > > single vCPU temporarily inhibiting AVIC will zap all SPTEs _twice_; on disable
> > > and again on re-enable.
> > >
> > > Rather than pile on more gunk, what about special casing the APIC access page
> > > memslot in try_async_pf()? E.g. zap the GFN in avic_update_access_page() when
> > > disabling (and bounce through kvm_{inc,dec}_notifier_count()), and have the page
> > > fault path skip directly to MMIO emulation without caching the MMIO info. It'd
> > > also give us a good excuse to rename try_async_pf() :-)
> > >
> > > If lack of MMIO caching is a performance problem, an alternative solution would
> > > be to allow caching but add a helper to zap the MMIO SPTE and request all vCPUs to
> > > clear their cache.
> > >
> > > It's all a bit gross, especially hijacking the mmu_notifier path, but IMO it'd be
> > > less awful than the current memslot+SRCU mess.
> >
> > Hi!
> >
> > I am testing your approach and it actually works very well! I can't seem to break it.
> >
> > Could you explain why do I need to do something with kvm_{inc,dec}_notifier_count()) ?
>
> Glad you asked, there's one more change needed. kvm_zap_gfn_range() currently
> takes mmu_lock for read, but it needs to take mmu_lock for write for this case
> (more way below).
>
> The existing users, update_mtrr() and kvm_post_set_cr0(), are a bit sketchy. The
> whole thing is a grey area because KVM is trying to ensure it honors the guest's
> UC memtype for non-coherent DMA, but the inputs (CR0 and MTRRs) are per-vCPU,
> i.e. for it to work correctly, the guest has to ensure all running vCPUs do the
> same transition. So in practice there's likely no observable bug, but it also
> means that taking mmu_lock for read is likely pointless, because for things to
> work the guest has to serialize all running vCPUs.
>
> Ben, any objection to taking mmu_lock for write in kvm_zap_gfn_range()? It would
> effectively revert commit 6103bc074048 ("KVM: x86/mmu: Allow zap gfn range to
> operate under the mmu read lock"); see attached patch. And we could even bump
> the notifier count in that helper, e.g. on top of the attached:
>
> diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> index b607e8763aa2..7174058e982b 100644
> --- a/arch/x86/kvm/mmu/mmu.c
> +++ b/arch/x86/kvm/mmu/mmu.c
> @@ -5568,6 +5568,8 @@ void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
>
> write_lock(&kvm->mmu_lock);
>
> + kvm_inc_notifier_count(kvm, gfn_start, gfn_end);
> +
> if (kvm_memslots_have_rmaps(kvm)) {
> for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
> slots = __kvm_memslots(kvm, i);
> @@ -5598,6 +5600,8 @@ void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
> if (flush)
> kvm_flush_remote_tlbs_with_address(kvm, gfn_start, gfn_end);
>
> + kvm_dec_notifier_count(kvm, gfn_start, gfn_end);
> +
> write_unlock(&kvm->mmu_lock);
> }
>

I understand what you mean now. I thought that I need to change to code of the
kvm_inc_notifier_count/kvm_dec_notifier_count.




>
>
>
> Back to Maxim's original question...
>
> Elevating mmu_notifier_count and bumping mmu_notifier_seq will will handle the case
> where APICv is being disabled while a different vCPU is concurrently faulting in a
> new mapping for the APIC page. E.g. it handles this race:
>
> vCPU0 vCPU1
> apic_access_memslot_enabled = true;
> #NPF on APIC
> apic_access_memslot_enabled==true, proceed with #NPF
> apic_access_memslot_enabled = false
> kvm_zap_gfn_range(APIC);
> __direct_map(APIC)
>
> mov [APIC], 0 <-- succeeds, but KVM wants to intercept to emulate

I understand this now. I guess this can't happen with original memslot disable
which I guess has the needed locking and flushing to avoid this.
(I didnt' study the code in depth thought)
>
>
>
> The elevated mmu_notifier_count and/or changed mmu_notifier_seq will cause vCPU1
> to bail and resume the guest without fixing the #NPF. After acquiring mmu_lock,
> vCPU1 will see the elevated mmu_notifier_count (if kvm_zap_gfn_range() is about
> to be called, or just finised) and/or a modified mmu_notifier_seq (after the
> count was decremented).
>
> This is why kvm_zap_gfn_range() needs to take mmu_lock for write. If it's allowed
> to run in parallel with the page fault handler, there's no guarantee that the
> correct apic_access_memslot_enabled will be observed.

I understand now.

So, Paolo, Ben Gardon, what do you think. Do you think this approach is feasable?
Do you agree to revert the usage of the read lock?

I will post a new series using this approach very soon, since I already have
msot of the code done.

Best regards,
Maxim Levitsky

>
> if (is_tdp_mmu_fault)
> read_lock(&vcpu->kvm->mmu_lock);
> else
> write_lock(&vcpu->kvm->mmu_lock);
>
> if (!is_noslot_pfn(pfn) && mmu_notifier_retry_hva(vcpu->kvm, mmu_seq, hva)) <--- look here!
> goto out_unlock;
>
> if (is_tdp_mmu_fault)
> r = kvm_tdp_mmu_map(vcpu, gpa, error_code, map_writable, max_level,
> pfn, prefault);
> else
> r = __direct_map(vcpu, gpa, error_code, map_writable, max_level, pfn,
> prefault, is_tdp);


\
 
 \ /
  Last update: 2021-07-27 15:06    [W:0.074 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site