lkml.org 
[lkml]   [2021]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 04/10] drm/bridge: Document the probe issue with MIPI-DSI bridges
On Tue, Jul 20, 2021 at 7:15 PM Maxime Ripard <maxime@cerno.tech> wrote:
>
> Interactions between bridges, panels, MIPI-DSI host and the component
> framework are not trivial and can lead to probing issues when
> implementing a display driver. Let's document the various cases we need
> too consider, and the solution to support all the cases.
>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
> Documentation/gpu/drm-kms-helpers.rst | 6 +++
> drivers/gpu/drm/drm_bridge.c | 60 +++++++++++++++++++++++++++
> 2 files changed, 66 insertions(+)
>
> diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
> index 10f8df7aecc0..ec2f65b31930 100644
> --- a/Documentation/gpu/drm-kms-helpers.rst
> +++ b/Documentation/gpu/drm-kms-helpers.rst
> @@ -157,6 +157,12 @@ Display Driver Integration
> .. kernel-doc:: drivers/gpu/drm/drm_bridge.c
> :doc: display driver integration
>
> +Special Care with MIPI-DSI bridges
> +----------------------------------
> +
> +.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
> + :doc: special care dsi
> +
> Bridge Operations
> -----------------
>
> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> index c9a950bfdfe5..81f8dac12367 100644
> --- a/drivers/gpu/drm/drm_bridge.c
> +++ b/drivers/gpu/drm/drm_bridge.c
> @@ -95,6 +95,66 @@
> * documentation of bridge operations for more details).
> */
>
> +/**
> + * DOC: special care dsi
> + *
> + * The interaction between the bridges and other frameworks involved in
> + * the probing of the display driver and the bridge driver can be
> + * challenging. Indeed, there's multiple cases that needs to be
> + * considered:
> + *
> + * - The display driver doesn't use the component framework and isn't a
> + * MIPI-DSI host. In this case, the bridge driver will probe at some
> + * point and the display driver should try to probe again by returning
> + * EPROBE_DEFER as long as the bridge driver hasn't probed.
> + *
> + * - The display driver doesn't use the component framework, but is a
> + * MIPI-DSI host. The bridge device uses the MIPI-DCS commands to be
> + * controlled. In this case, the bridge device is a child of the
> + * display device and when it will probe it's assured that the display
> + * device (and MIPI-DSI host) is present. The display driver will be
> + * assured that the bridge driver is connected between the
> + * &mipi_dsi_host_ops.attach and &mipi_dsi_host_ops.detach operations.
> + * Therefore, it must run mipi_dsi_host_register() in its probe
> + * function, and then run drm_bridge_attach() in its
> + * &mipi_dsi_host_ops.attach hook.
> + *
> + * - The display driver uses the component framework and is a MIPI-DSI
> + * host. The bridge device uses the MIPI-DCS commands to be
> + * controlled. This is the same situation than above, and can run
> + * mipi_dsi_host_register() in either its probe or bind hooks.
> + *
> + * - The display driver uses the component framework and is a MIPI-DSI
> + * host. The bridge device uses a separate bus (such as I2C) to be
> + * controlled. In this case, there's no correlation between the probe
> + * of the bridge and display drivers, so care must be taken to avoid
> + * an endless EPROBE_DEFER loop, with each driver waiting for the
> + * other to probe.
> + *
> + * The ideal pattern to cover the last item (and all the others in the
> + * display driver case) is to split the operations like this:
> + *
> + * - In the display driver must run mipi_dsi_host_register() and
> + * component_add in its probe hook. It will make sure that the
> + * MIPI-DSI host sticks around, and that the driver's bind can be
> + * called.
> + *
> + * - In its probe hook, the bridge driver must not try to find its
> + * MIPI-DSI host or register as a MIPI-DSI device. As far as the
> + * framework is concerned, it must only call drm_bridge_add().
> + *
> + * - In its bind hook, the display driver must try to find the bridge
> + * and return -EPROBE_DEFER if it doesn't find it. If it's there, it
> + * must call drm_bridge_attach(). The MIPI-DSI host is now functional.

There is an another problem occur for this scenario in the case of kms
hotplug driver, sun6i_mipi_dsi.c. When host attach wait till drm
device pointer found and drm device pointer would found only when bind
done, and bind would complete only when &drm_bridge_funcs.attach hooks
are complete. But, If DSI driver is fully bridge driven then this
attach in bind will trigger panel_bridge hook attach and at this point
we cannot get panel_bridge at all which indeed second attach would
would failed.

This is one of the reason I'm trying to use drm_bridge_attach host
attach itself instead of component bind, not yet succeeded.

Thanks,
Jagan.

\
 
 \ /
  Last update: 2021-07-27 11:42    [W:0.159 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site