lkml.org 
[lkml]   [2021]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 13/14] docs: hwmon: Document PECI drivers
Date
On Mon, Jul 12, 2021 at 05:04:46PM CDT, Iwona Winiarska wrote:
>From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>
>Add documentation for peci-cputemp driver that provides DTS thermal
>readings for CPU packages and CPU cores and peci-dimmtemp driver that
>provides DTS thermal readings for DIMMs.
>
>Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>Co-developed-by: Iwona Winiarska <iwona.winiarska@intel.com>
>Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
>Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
>---
> Documentation/hwmon/index.rst | 2 +
> Documentation/hwmon/peci-cputemp.rst | 93 +++++++++++++++++++++++++++
> Documentation/hwmon/peci-dimmtemp.rst | 58 +++++++++++++++++
> MAINTAINERS | 2 +
> 4 files changed, 155 insertions(+)
> create mode 100644 Documentation/hwmon/peci-cputemp.rst
> create mode 100644 Documentation/hwmon/peci-dimmtemp.rst
>
>diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
>index bc01601ea81a..cc76b5b3f791 100644
>--- a/Documentation/hwmon/index.rst
>+++ b/Documentation/hwmon/index.rst
>@@ -154,6 +154,8 @@ Hardware Monitoring Kernel Drivers
> pcf8591
> pim4328
> pm6764tr
>+ peci-cputemp
>+ peci-dimmtemp
> pmbus
> powr1220
> pxe1610
>diff --git a/Documentation/hwmon/peci-cputemp.rst b/Documentation/hwmon/peci-cputemp.rst
>new file mode 100644
>index 000000000000..d3a218ba810a
>--- /dev/null
>+++ b/Documentation/hwmon/peci-cputemp.rst
>@@ -0,0 +1,93 @@
>+.. SPDX-License-Identifier: GPL-2.0-only
>+
>+Kernel driver peci-cputemp
>+==========================
>+
>+Supported chips:
>+ One of Intel server CPUs listed below which is connected to a PECI bus.
>+ * Intel Xeon E5/E7 v3 server processors
>+ Intel Xeon E5-14xx v3 family
>+ Intel Xeon E5-24xx v3 family
>+ Intel Xeon E5-16xx v3 family
>+ Intel Xeon E5-26xx v3 family
>+ Intel Xeon E5-46xx v3 family
>+ Intel Xeon E7-48xx v3 family
>+ Intel Xeon E7-88xx v3 family
>+ * Intel Xeon E5/E7 v4 server processors
>+ Intel Xeon E5-16xx v4 family
>+ Intel Xeon E5-26xx v4 family
>+ Intel Xeon E5-46xx v4 family
>+ Intel Xeon E7-48xx v4 family
>+ Intel Xeon E7-88xx v4 family
>+ * Intel Xeon Scalable server processors
>+ Intel Xeon D family
>+ Intel Xeon Bronze family
>+ Intel Xeon Silver family
>+ Intel Xeon Gold family
>+ Intel Xeon Platinum family
>+
>+ Datasheet: Available from http://www.intel.com/design/literature.htm
>+
>+Author: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>+
>+Description
>+-----------
>+
>+This driver implements a generic PECI hwmon feature which provides Digital
>+Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that are
>+accessible via the processor PECI interface.
>+
>+All temperature values are given in millidegree Celsius and will be measurable
>+only when the target CPU is powered on.
>+
>+Sysfs interface
>+-------------------
>+
>+======================= =======================================================
>+temp1_label "Die"
>+temp1_input Provides current die temperature of the CPU package.
>+temp1_max Provides thermal control temperature of the CPU package
>+ which is also known as Tcontrol.
>+temp1_crit Provides shutdown temperature of the CPU package which
>+ is also known as the maximum processor junction
>+ temperature, Tjmax or Tprochot.
>+temp1_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
>+ the CPU package.
>+
>+temp2_label "DTS"
>+temp2_input Provides current DTS temperature of the CPU package.

Would this be a good place to note the slightly counter-intuitive nature
of DTS readings? i.e. add something along the lines of "The DTS sensor
produces a delta relative to Tjmax, so negative values are normal and
values approaching zero are hot." (In my experience people who aren't
already familiar with it tend to think something's wrong when a CPU
temperature reading shows -50C.)

>+temp2_max Provides thermal control temperature of the CPU package
>+ which is also known as Tcontrol.
>+temp2_crit Provides shutdown temperature of the CPU package which
>+ is also known as the maximum processor junction
>+ temperature, Tjmax or Tprochot.
>+temp2_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
>+ the CPU package.
>+
>+temp3_label "Tcontrol"
>+temp3_input Provides current Tcontrol temperature of the CPU
>+ package which is also known as Fan Temperature target.
>+ Indicates the relative value from thermal monitor trip
>+ temperature at which fans should be engaged.
>+temp3_crit Provides Tcontrol critical value of the CPU package
>+ which is same to Tjmax.
>+
>+temp4_label "Tthrottle"
>+temp4_input Provides current Tthrottle temperature of the CPU
>+ package. Used for throttling temperature. If this value
>+ is allowed and lower than Tjmax - the throttle will
>+ occur and reported at lower than Tjmax.
>+
>+temp5_label "Tjmax"
>+temp5_input Provides the maximum junction temperature, Tjmax of the
>+ CPU package.
>+
>+temp[6-N]_label Provides string "Core X", where X is resolved core
>+ number.
>+temp[6-N]_input Provides current temperature of each core.
>+temp[6-N]_max Provides thermal control temperature of the core.
>+temp[6-N]_crit Provides shutdown temperature of the core.
>+temp[6-N]_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of
>+ the core.

I only see *_label and *_input for the per-core temperature sensors, no
*_max, *_crit, or *_crit_hyst.

>+
>+======================= =======================================================
>diff --git a/Documentation/hwmon/peci-dimmtemp.rst b/Documentation/hwmon/peci-dimmtemp.rst
>new file mode 100644
>index 000000000000..1778d9317e43
>--- /dev/null
>+++ b/Documentation/hwmon/peci-dimmtemp.rst
>@@ -0,0 +1,58 @@
>+.. SPDX-License-Identifier: GPL-2.0
>+
>+Kernel driver peci-dimmtemp
>+===========================
>+
>+Supported chips:
>+ One of Intel server CPUs listed below which is connected to a PECI bus.
>+ * Intel Xeon E5/E7 v3 server processors
>+ Intel Xeon E5-14xx v3 family
>+ Intel Xeon E5-24xx v3 family
>+ Intel Xeon E5-16xx v3 family
>+ Intel Xeon E5-26xx v3 family
>+ Intel Xeon E5-46xx v3 family
>+ Intel Xeon E7-48xx v3 family
>+ Intel Xeon E7-88xx v3 family
>+ * Intel Xeon E5/E7 v4 server processors
>+ Intel Xeon E5-16xx v4 family
>+ Intel Xeon E5-26xx v4 family
>+ Intel Xeon E5-46xx v4 family
>+ Intel Xeon E7-48xx v4 family
>+ Intel Xeon E7-88xx v4 family
>+ * Intel Xeon Scalable server processors
>+ Intel Xeon D family
>+ Intel Xeon Bronze family
>+ Intel Xeon Silver family
>+ Intel Xeon Gold family
>+ Intel Xeon Platinum family
>+
>+ Datasheet: Available from http://www.intel.com/design/literature.htm
>+
>+Author: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>+
>+Description
>+-----------
>+
>+This driver implements a generic PECI hwmon feature which provides Digital
>+Thermal Sensor (DTS) thermal readings of DIMM components that are accessible
>+via the processor PECI interface.

I had thought "DTS" referred to a fairly specific sensor in the CPU; is
the same term also used for DIMM temp sensors or is the mention of it
here a copy/paste error?

>+
>+All temperature values are given in millidegree Celsius and will be measurable
>+only when the target CPU is powered on.
>+
>+Sysfs interface
>+-------------------
>+
>+======================= =======================================================
>+
>+temp[N]_label Provides string "DIMM CI", where C is DIMM channel and
>+ I is DIMM index of the populated DIMM.
>+temp[N]_input Provides current temperature of the populated DIMM.
>+temp[N]_max Provides thermal control temperature of the DIMM.
>+temp[N]_crit Provides shutdown temperature of the DIMM.
>+
>+======================= =======================================================
>+
>+Note:
>+ DIMM temperature attributes will appear when the client CPU's BIOS
>+ completes memory training and testing.
>diff --git a/MAINTAINERS b/MAINTAINERS
>index 35ba9e3646bd..d16da127bbdc 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -14509,6 +14509,8 @@ M: Iwona Winiarska <iwona.winiarska@intel.com>
> R: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> L: linux-hwmon@vger.kernel.org
> S: Supported
>+F: Documentation/hwmon/peci-cputemp.rst
>+F: Documentation/hwmon/peci-dimmtemp.rst
> F: drivers/hwmon/peci/
>
> PECI SUBSYSTEM
>--
>2.31.1
>
\
 
 \ /
  Last update: 2021-07-28 01:00    [W:0.617 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site