lkml.org 
[lkml]   [2021]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 2/5] net: ipa: get another clock for ipa_setup()
Date
Two places call ipa_setup().  The first, ipa_probe(), holds an IPA
clock reference when calling ipa_setup() (if the AP is responsible
for IPA firmware loading). But if the modem is loading IPA
firmware, ipa_smp2p_modem_setup_ready_isr() calls ipa_setup() after
the modem has signaled the hardware is ready. This can happen at
any time, and there is no guarantee the hardware is active.

Have ipa_smp2p_modem_setup() take an IPA clock reference before it
calls ipa_setup(), and release it once setup is complete.

Signed-off-by: Alex Elder <elder@linaro.org>
---
drivers/net/ipa/ipa_smp2p.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/net/ipa/ipa_smp2p.c b/drivers/net/ipa/ipa_smp2p.c
index 93270e50b6b35..0d15438a79e2d 100644
--- a/drivers/net/ipa/ipa_smp2p.c
+++ b/drivers/net/ipa/ipa_smp2p.c
@@ -156,11 +156,16 @@ static irqreturn_t ipa_smp2p_modem_setup_ready_isr(int irq, void *dev_id)
if (!smp2p->disabled) {
int ret;

+ /* The clock needs to be active for setup */
+ ipa_clock_get(smp2p->ipa);
+
ret = ipa_setup(smp2p->ipa);
if (ret)
dev_err(&smp2p->ipa->pdev->dev,
"error %d from ipa_setup()\n", ret);
smp2p->disabled = true;
+
+ ipa_clock_put(smp2p->ipa);
}

mutex_unlock(&smp2p->mutex);
--
2.27.0
\
 
 \ /
  Last update: 2021-07-27 23:22    [W:0.081 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site