lkml.org 
[lkml]   [2021]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v1 1/1] net: phy: dp83td510: Add basic support for the DP83TD510 Ethernet PHY
> With current driver ethtool with show this information:
> Settings for eth1:
> Supported ports: [ TP MII ]
> Supported link modes: Not reported

Interesting. The default function for getting the PHYs abilities is
doing better than i expected. I was guessing you would see 10BaseT
here.

Given that, what you have is O.K. for the moment.

> > I suspect you are talking about the PoE aspects. That is outside the
> > scope for phylib. PoE in general is not really supported in the Linux
> > kernel, and probably needs a subsystem of its own.
>
> No, no. I'm talking about data signals configuration (2.4Vpp/1Vpp), which
> depends on application and cable length. 1Vpp should not be used with
> cable over 200 meter

Should not be used, or is not expected to work very well?

> and 2.4Vpp should not be used on safety critical applications.

Please work with the other T1L driver writer to propose a suitable way
to configure this. We want all T1L drivers to use the same
configuration method, DT properties etc.

Andrew

\
 
 \ /
  Last update: 2021-07-26 15:23    [W:0.074 / U:2.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site