lkml.org 
[lkml]   [2021]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/5] Add FF-A support in OP-TEE driver
On Mon, 26 Jul 2021 at 16:25, Sudeep Holla <sudeep.holla@arm.com> wrote:
>
> On Mon, Jul 26, 2021 at 03:59:36PM +0530, Sumit Garg wrote:
> > Hi Jens,
> >
> > On Thu, 22 Jul 2021 at 17:48, Jens Wiklander <jens.wiklander@linaro.org> wrote:
> > >
> > > Hi all,
> > >
> > > This adds supports for the OP-TEE driver to communicate with secure world
> > > using FF-A [1] as transport.
> > >
> > > There is one change to the TEE subsystem with "tee: add sec_world_id to
> > > struct tee_shm" to add support for holding globally unique handle assigned
> > > by the FF-A. This is a field that I believe could useful for the AMDTEE
> > > driver too.
> > >
> > > For communication the OP-TEE message protocol is still used, but with a new
> > > type of memory reference, struct optee_msg_param_fmem, to carry the
> > > information needed by FF-A. The OP-TEE driver is refactored internally with
> > > to sets of callbacks, one for the old SMC based communication and another
> > > set with FF-A as transport. The functions relating to the SMC based ABI
> > > are moved to smc_abi.c while the FF-A based ABI is added in a ffa_abi.c.
> > >
> > > There is also a difference in how the drivers are instantiated. With the
> > > SMC based transport we have a platform driver, module_platform_driver(),
> > > today which we're keeping as is for this configuration. In a FF-A system we
> > > have a FF-A driver, module_ffa_driver(), instead.
> > >
> > > The OP-TEE driver can be compiled for both targets at the same time and
> > > it's up to runtime configuration (device tree or ACPI) to decide how it's
> > > initialized. Note that it's only the old SMC based driver instance that
> > > need device tree or ACPI to initialize. The FF-A based driver relies on the
> > > FF-A bus instead.
> > >
> > > This can be tested QEMU
> > > The repo for SPMC at S-EL1 retrieved by
> > > repo init -u https://github.com/jenswi-linaro/manifest.git -m
> > > qemu_v8.xml -b ffav4_spmc
> > > repo sync
> > > # Then checkout the branch optee_ffa_v3 from
> > > # git://git.linaro.org/people/jens.wiklander/linux-tee.git
> > > # in the linux directory
> > >
> > > To build do:
> > > cd build
> > > make toolchains
> > > make all
> > >
> > > To boot:
> > > make run-only
> > >
> > > Test with xtest, perhaps only with the command "xtest 1004" in case you're
> > > not interested in too many tests.
> >
> > Thanks Jens for sharing instructions to test this feature. So I tried
> > to reproduce using following repo versions:
> >
> > linux-tee, branch: optee_ffa_v3
> > trusted-firmware-a, branch: ffav4_sel1_spmc
> > build, branch: ffav4_spmc
> >
> > and rest of the repos synced to the latest version as per upstream
> > qemu_v8.xml [1] but I don't see OP-TEE driver being probed during boot
> > [2]. Am I missing something?
> >
> > [1] https://github.com/OP-TEE/manifest/blob/master/qemu_v8.xml
> > [2]
> > Welcome to Buildroot, type root or test to login
> > buildroot login: root
> > # dmesg | grep optee
> >
>
> Do you see ARM FF-A driver initialised successfully ?
> You must see "ARM FF-A Version 1.0 found" or something similar based on
> the actual version supported.
>
> If so, can you check if the partitions are correctly populated by
> the driver using the discover API.
>
> $ grep "" /sys/bus/arm_ffa/devices/*/uuid
>
> If uuid reads zeros, then the devices are populated, just the matching
> driver is not found(due to the workaround for v1.0 spec)
>

It turns out to be an issue with my build environment, I re-built from
scratch and I could see OP-TEE being probed successfully:

# dmesg | grep FF-A
[ 0.356382] ARM FF-A: Version 1.0 found
#
# cat /sys/bus/arm_ffa/devices/arm-ffa-8001/uuid
486178e0-e7f8-11e3-bc5e-0002a5d5c51b
#
# dmesg | grep optee
[ 4.991472] optee: revision 3.14 (49dbb9ef)
[ 5.010110] optee: initialized driver
#

Jens,

From xtest logs it looks like the pseudo TA interface isn't working for me:

* regression_1001 Core self tests
- 1001 - skip test, pseudo TA not found
regression_1001 OK

* regression_1002 PTA parameters
- 1002 - skip test, pseudo TA not found
regression_1002 OK

* regression_1003 Core internal read/write mutex
- 1003 - skip test, pseudo TA not found
regression_1003 OK

Similarly, pseudo TAs acting as TEE bus devices doesn't work as well
as I see following devices directory being empty:

# ls /sys/bus/tee/devices/
#

As otherwise with OP-TEE SMC ABI, we should have at least the default
pseudo TA [1] kernel device there.

So is pseudo TA functional with this new FF-A interface?

[1] https://github.com/OP-TEE/optee_os/blob/master/core/pta/tests/invoke.c#L445

-Sumit

> --
> Regards,
> Sudeep

\
 
 \ /
  Last update: 2021-07-26 13:42    [W:0.111 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site