lkml.org 
[lkml]   [2021]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 0/6] Support second Image Signal Processor on rk3399
Date
Am Mittwoch, 10. Februar 2021, 12:10:14 CEST schrieb Heiko Stuebner:
> The rk3399 has two ISPs and right now only the first one is usable.
> The second ISP is connected to the TXRX dphy on the soc.
>
> The phy of ISP1 is only accessible through the DSI controller's
> io-memory, so this series adds support for simply using the dsi
> controller is a phy if needed.
>
> That solution is needed at least on rk3399 and rk3288 but no-one
> has looked at camera support on rk3288 at all, so right now
> only implement the rk3399 specifics.
>
> changes in v2:
> - enable grf-clock also for init callback
> to not break if for example hdmi is connected on boot
> and disabled the grf clock during its probe
> - add Sebastian's Tested-by
> - add Rob's Ack for the phy-cells property

finally found the time and applied patches 1-3 to drmmisc-next
after fixing the alphabetical kconfig ordering Helen pointed out
and also applied patches 4-6 to my rockchip tree for 5.15


>
> Heiko Stuebner (6):
> drm/rockchip: dsi: add own additional pclk handling
> dt-bindings: display: rockchip-dsi: add optional #phy-cells property
> drm/rockchip: dsi: add ability to work as a phy instead of full dsi
> arm64: dts: rockchip: add #phy-cells to mipi-dsi1
> arm64: dts: rockchip: add cif clk-control pinctrl for rk3399
> arm64: dts: rockchip: add isp1 node on rk3399
>
> .../display/rockchip/dw_mipi_dsi_rockchip.txt | 1 +
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 39 ++
> drivers/gpu/drm/rockchip/Kconfig | 2 +
> .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 349 ++++++++++++++++++
> 4 files changed, 391 insertions(+)
>
>




\
 
 \ /
  Last update: 2021-07-26 00:59    [W:0.135 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site