lkml.org 
[lkml]   [2021]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V7 1/3] dt-bindings: mfd: pm8008: Add gpio-ranges and spmi-gpio compatible
On Fri 23 Jul 03:31 CDT 2021, satya priya wrote:

> Add gpio-ranges and "qcom,spmi-gpio" compatible to match with the
> parent qcom,pmic-gpio.yaml binding.
>
> Signed-off-by: satya priya <skakit@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

But it doesn't capture the full binding of qcom,pm8008-gpio - which is
properly described by the end of this series. As such I expect that any
non-trivial usage of the pm8008-gpio in a dts will fail dts validation.

I still think this patch can be merged, but I don't think we're done
expressing the PMIC bindings.

Regards,
Bjorn

> ---
> Changes in V7:
> - This is newly added in V7 to resolve below error.
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: compatible: ['qcom,pm8008-gpio'] is too short
> From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/qcom,pm8008.example.dt.yaml: gpio@c000: 'gpio-ranges' is a required property
> From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
>
> Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> index 7799368..ec3138c 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
> @@ -53,7 +53,9 @@ patternProperties:
>
> properties:
> compatible:
> - const: qcom,pm8008-gpio
> + items:
> + - const: qcom,pm8008-gpio
> + - const: qcom,spmi-gpio
>
> reg:
> description: Peripheral address of one of the two GPIO peripherals.
> @@ -61,6 +63,9 @@ patternProperties:
>
> gpio-controller: true
>
> + gpio-ranges:
> + maxItems: 1
> +
> interrupt-controller: true
>
> "#interrupt-cells":
> @@ -75,6 +80,7 @@ patternProperties:
> - gpio-controller
> - interrupt-controller
> - "#gpio-cells"
> + - gpio-ranges
> - "#interrupt-cells"
>
> additionalProperties: false
> @@ -107,10 +113,11 @@ examples:
> interrupt-parent = <&tlmm>;
> interrupts = <32 IRQ_TYPE_EDGE_RISING>;
>
> - gpio@c000 {
> - compatible = "qcom,pm8008-gpio";
> + pm8008_gpios: gpio@c000 {
> + compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
> reg = <0xc000>;
> gpio-controller;
> + gpio-ranges = <&pm8008_gpios 0 0 2>;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

\
 
 \ /
  Last update: 2021-07-25 20:18    [W:0.911 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site