lkml.org 
[lkml]   [2021]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 00/11] arm64: sunxi: Initial Allwinner H616 SoC support
From
Date
在 2021-07-23星期五的 16:38 +0100,Andre Przywara写道:
> Hi,
>
> another try on the basic Allwinner H616 support, now on top of 5.14-
> rc1.
>
> This time I dropped the USB support from the basic series, to split
> off
> the discussion, and simplify the core SoC support. I will post the
> USB
> series soon, to be applied on top.
> I kept the RTC support in, even though this is still under
> discussion,
> because this is important to keep future DT files compatible with
> this
> kernel. This gains one fix patch for the existing RTC driver.

Well, I think RTC is really a fundmental part of SoC support now.

I think if I post my R329 patchset, it will depend on this patchset's
RTC part (R329 has linear day too, although it still has external LOSC
(and even LOSC fanout) ).

BTW Thanks for your code ;-)

>
> For a complete changelog, see below.
>
> Based on 5.14-rc1. Let me know if you need a different base.
> Relies on this pinctrl fix:
> http://lists.infradead.org/pipermail/linux-arm-kernel/2021-July/672813.html
>
> Also available here:
> https://github.com/apritzel/linux/commits/h616-v8
>
> Thanks!
> Andre
>
> ==================
> This series gathers patches to support the Allwinner H616 SoC. This
> is
> a rather uninspired SoC (Quad-A53 with the usual peripherals), but
> allows for some cheap development boards and TV boxes, and supports
> up to 4GB of DRAM.
>
> Some DT binding patches are sprinkled throughout the series, to add
> the new compatible names right before they are used.
> Patch 3-7 add support for the new RTC: the date is now stored as a
> linear number, not broken down into day-month-year. The benefit is
> that
> this lifts the limit of the old date counter, which would have rolled
> over around 2032. Also the alarm setting is using the same storage
> format as the current time, compared to the number of seconds left
> used
> in existing SoCs.
> Eventually we get the .dtsi for the SoC in patch 8, and the .dts for
> the OrangePi Zero2 board[1] in the penultimate patch, followed by
> the .dts for the X96 Mate TV box[2] in the final commit.
>
> U-Boot and Trusted Firmware support is now merged in released
> versions,
> it allows booting via FEL or SD card, also you can TFTP kernels in on
> the OrangePi Zero 2 board.
>
> Many thanks to Jernej for his tremendous help on this, also for the
> awesome input and help from the #linux-sunxi Freenode channel.
>
> The whole series (including the pinctrl fix) can also be found here:
> https://github.com/apritzel/linux/commits/h616-v8
>
> Happy reviewing!
>
> Cheers,
> Andre
>
> [1] https://linux-sunxi.org/Orange_Pi_Zero_2
> [2] https://linux-sunxi.org/X96_Mate
>
> Changelog v7 .. v8:
> - Rebase on top of 5.14-rc1, which already includes the previous v7
> 02/19
> - Drop USB and Ethernet patches (to keep series small)
> - Use "clocks: false" in RTC DT binding (2/11)
> - Include fix for RTC overflow check (3/11)
> - Use div_64() to avoid linking error on some 32-bit platforms
> (4+5/11)
> - Adjust to changed RTC overflow check (5/11)
> - Drop USB nodes from .dtsi file
> - Move mmc-ddr-1_8v property from .dtsi file into board .dts
> - Fix DTC warnings (underscore in node name, soc@0, #a-c in IRQ
> controllers)
>
> Changelog v6 .. v7:
> - Fix AXP305 binding documentation blunder (01/19)
> - Improve new linear day support (use existing conversion functions)
> (04/19)
> - Add support for changed RTC alarm registers (05/19)
> - Add support for RTCs without a LOSC clock (06/19)
> - Rework USB PHY2 SIDDQ quirk to use PHY clocks directly (14/19)
> - Add X96 Mate compatible string to binding doc (17/19)
> - Add Rob's ACKs
>
> Changelog v5 .. v6:
> - Drop already merged clock, pinctrl and MMC support from this series
> - Properly fix AXP support by skipping power key initialisation
> - Add patch to support new RTC date storage encoding
> - Re-add USB HCI PHY refactoring
> - Add patch to allow USB reset line sharing
> - Add patch to introduce quirk for PHY2 SIDDQ clearing
> - Re-add USB nodes to the .dtsi
> - Add USB gadget support
> - Add DT for X96 Mate TV box
>
> Changelog v4 .. v5:
> - Fix CCU binding to pass dtbs_check
> - Add RSB compatible string to binding doc
> - Rename IR pin name to pass dtbs_check
> - Add EMAC compatible string to binding doc
> - Drop USB PHY support and binding doc patches
> - Drop USB nodes from .dtsi and .dts
> - Drop second EMAC node from .dtsi
>
> Changelog v3 .. v4:
> - Drop MMC and pinctrl matches (already in some -next trees)
> - Add Maxime's Acks
> - Add patch to update the AXP MFD DT bindings
> - Add new patch (05/21) to fix axp20x-pek driver
> - Change AXP IRQ fix to check for invalid IRQ line number
> - Split joint DT bindings patch (v3 18/21) into subsystems
> - move dwmac variable to keep christmas tree
> - Use enums for USB PHY compatible strings in DT binding
> - Enable watchdog (briefly verified to work)
> - Add PHY2 to HCI1&3, this fixes USB
> - limit r-ccu register frame length to not collide with NMI
> controller
> - add interrupt-controller property to AXP DT node
>
> Changelog v2 .. v3:
> - Add Rob's Acks
> - Drop redundant maxItems from pinctrl DT binding
> - Rename h_i2s* to just i2s* in pinctrl names
> - Use more declarative i2s0_d{in,out}{0,1} names
> - Add RSB pins to pinctrl
> - Include RSB clocks (sharing with newly added H6 versions)
> - Fix CEC clock (add 2nd enable bit, also fix predivider flag)
> - Rename PMU_UNK1 register in USB PHY
> - Add USB and MUSB DT binding patches
> - Add MMC/SD speed modes to .dtsi
>
> Changelog v1 .. v2:
> - pinctrl: adjust irq bank map to cover undocumented GPIO bank IRQs
> - use differing h_i2s0 pin output names
> - r-ccu: fix number of used clocks
> - ccu: remove PLL-PERIPHy(4X)
> - ccu: fix gpu1 divider range
> - ccu: fix usb-phy3 parent
> - ccu: add missing TV clocks
> - ccu: rework to CLK_OF_DECLARE style
> - ccu: enable output bit for PLL clocks
> - ccu: renumber clocks
> - .dtsi: drop sun50i-a64-system-control fallback
> - .dtsi: drop unknown SRAM regions
> - .dtsi: add more (undocumented) GPIO interrupts
> - .dtsi: fix I2C3 pin names
> - .dtsi: use a100-emmc fallback for MMC2
> - .dtsi: add second EMAC controller
> - .dtsi: use H3 MUSB controller fallback
> - .dtsi: fix frame size for USB PHY PMU registers
> - .dtsi: add USB0 PHY references
> - .dtsi: fix IR controller clock source
> - .dts: fix LED naming and swap pins
> - .dts: use 5V supply parent for USB supply
> - .dts: drop dummy IRQ for AXP
> - .dts: enable 3V3 header pin power rail
> - .dts: add SPI flash node
> - .dts: make USB-C port peripheral only
> - add IRQ-less AXP support
> - add two patches to support more than one EMAC clock
> - add patch to rework and extend USB PHY support
> - add DT binding documentation patches
>
> Andre Przywara (11):
>   dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ)
>   dt-bindings: rtc: sun6i: Add H616 compatible string
>   rtc: sun6i: Fix time overflow handling
>   rtc: sun6i: Add support for linear day storage
>   rtc: sun6i: Add support for broken-down alarm registers
>   rtc: sun6i: Add support for RTCs without external LOSCs
>   rtc: sun6i: Add Allwinner H616 support
>   arm64: dts: allwinner: Add Allwinner H616 .dtsi file
>   dt-bindings: arm: sunxi: Add two H616 board compatible strings
>   arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support
>   arm64: dts: allwinner: h616: Add X96 Mate TV box support
>
>  .../devicetree/bindings/arm/sunxi.yaml        |  10 +
>  .../devicetree/bindings/mfd/axp20x.txt        |   3 +-
>  .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml |  14 +
>  arch/arm64/boot/dts/allwinner/Makefile        |   2 +
>  .../allwinner/sun50i-h616-orangepi-zero2.dts  | 204 +++++++
>  .../dts/allwinner/sun50i-h616-x96-mate.dts    | 178 ++++++
>  .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 575
> ++++++++++++++++++
>  drivers/rtc/rtc-sun6i.c                       | 169 +++--
>  8 files changed, 1104 insertions(+), 51 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-
> orangepi-zero2.dts
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-x96-
> mate.dts
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
>

\
 
 \ /
  Last update: 2021-07-25 18:42    [W:0.146 / U:2.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site