lkml.org 
[lkml]   [2021]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 02/11] clk: Ingenic: Adjust cgu code to make it compatible with I2S PLL.
Date
I2S PLL is different from the APLL/MPLL, which have no OD bits,
no stable bit, but have parent clock selection bits, therefore,
it is necessary to modify the CGU PLL correlation code to make
it compatible with I2S PLL.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---

Notes:
v5:
New patch.

v5->v6:
Change the type of stable_bit from u8 to s8, because a negative value will appear
when the stable_bit bit does not exist.
Reported-by: kernel test robot <lkp@intel.com>

v6->v7:
No change.

drivers/clk/ingenic/cgu.c | 118 ++++++++++++++++++++++++++++++++++++++++------
drivers/clk/ingenic/cgu.h | 10 +++-
2 files changed, 111 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 266c759..391bf50 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -76,6 +76,85 @@ ingenic_cgu_gate_set(struct ingenic_cgu *cgu,
* PLL operations
*/

+static u8 ingenic_pll_get_parent(struct clk_hw *hw)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_pll_info *pll_info;
+ u32 reg;
+ u8 i, hw_idx, idx = 0;
+
+ BUG_ON(clk_info->type != CGU_CLK_PLL);
+ pll_info = &clk_info->pll;
+
+ if (pll_info->mux_bits <= 0)
+ return 1;
+
+ reg = readl(cgu->base + pll_info->reg);
+ hw_idx = (reg >> pll_info->mux_shift) &
+ GENMASK(pll_info->mux_bits - 1, 0);
+
+ /*
+ * Convert the hardware index to the parent index by skipping
+ * over any -1's in the parents array.
+ */
+ for (i = 0; i < hw_idx; i++) {
+ if (clk_info->parents[i] != -1)
+ idx++;
+ }
+
+ return idx;
+}
+
+static int ingenic_pll_set_parent(struct clk_hw *hw, u8 idx)
+{
+ struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+ const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+ struct ingenic_cgu *cgu = ingenic_clk->cgu;
+ const struct ingenic_cgu_pll_info *pll_info;
+ unsigned long flags;
+ u32 reg;
+ u8 curr_idx, hw_idx, num_poss;
+
+ BUG_ON(clk_info->type != CGU_CLK_PLL);
+ pll_info = &clk_info->pll;
+
+ if (pll_info->mux_bits <= 0)
+ return 0;
+
+ /*
+ * Convert the parent index to the hardware index by adding
+ * 1 for any -1 in the parents array preceding the given
+ * index. That is, we want the index of idx'th entry in
+ * clk_info->parents which does not equal -1.
+ */
+ hw_idx = curr_idx = 0;
+ num_poss = 1 << pll_info->mux_bits;
+ for (; hw_idx < num_poss; hw_idx++) {
+ if (clk_info->parents[hw_idx] == -1)
+ continue;
+ if (curr_idx == idx)
+ break;
+ curr_idx++;
+ }
+
+ /* idx should always be a valid parent */
+ BUG_ON(curr_idx != idx);
+
+ spin_lock_irqsave(&cgu->lock, flags);
+
+ /* write the register */
+ reg = readl(cgu->base + pll_info->reg);
+ reg &= ~(GENMASK(pll_info->mux_bits - 1, 0) << pll_info->mux_shift);
+ reg |= hw_idx << pll_info->mux_shift;
+ writel(reg, cgu->base + pll_info->reg);
+
+ spin_unlock_irqrestore(&cgu->lock, flags);
+
+ return 0;
+}
+
static unsigned long
ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
@@ -96,8 +175,20 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
m += pll_info->m_offset;
n = (ctl >> pll_info->n_shift) & GENMASK(pll_info->n_bits - 1, 0);
n += pll_info->n_offset;
- od_enc = ctl >> pll_info->od_shift;
- od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+ if (pll_info->od_encoding) {
+ od_enc = ctl >> pll_info->od_shift;
+ od_enc &= GENMASK(pll_info->od_bits - 1, 0);
+
+ for (od = 0; od < pll_info->od_max; od++) {
+ if (pll_info->od_encoding[od] == od_enc)
+ break;
+ }
+ BUG_ON(od == pll_info->od_max);
+ od++;
+ } else {
+ od = 1;
+ }

if (pll_info->bypass_bit >= 0) {
ctl = readl(cgu->base + pll_info->bypass_reg);
@@ -108,15 +199,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
return parent_rate;
}

- for (od = 0; od < pll_info->od_max; od++) {
- if (pll_info->od_encoding[od] == od_enc)
- break;
- }
- BUG_ON(od == pll_info->od_max);
- od++;
-
- return div_u64((u64)parent_rate * m * pll_info->rate_multiplier,
- n * od);
+ return div_u64((u64)parent_rate * m * pll_info->rate_multiplier, n * od);
}

static void
@@ -215,13 +298,15 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
ctl &= ~(GENMASK(pll_info->n_bits - 1, 0) << pll_info->n_shift);
ctl |= (n - pll_info->n_offset) << pll_info->n_shift;

- ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
- ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
+ if (pll_info->od_encoding) {
+ ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
+ ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
+ }

writel(ctl, cgu->base + pll_info->reg);

/* If the PLL is enabled, verify that it's stable */
- if (ctl & BIT(pll_info->enable_bit))
+ if ((pll_info->stable_bit >= 0) && (ctl & BIT(pll_info->enable_bit)))
ret = ingenic_pll_check_stable(cgu, pll_info);

spin_unlock_irqrestore(&cgu->lock, flags);
@@ -292,6 +377,9 @@ static int ingenic_pll_is_enabled(struct clk_hw *hw)
}

static const struct clk_ops ingenic_pll_ops = {
+ .get_parent = ingenic_pll_get_parent,
+ .set_parent = ingenic_pll_set_parent,
+
.recalc_rate = ingenic_pll_recalc_rate,
.round_rate = ingenic_pll_round_rate,
.set_rate = ingenic_pll_set_rate,
@@ -672,7 +760,7 @@ static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx)
clk_init.flags |= CLK_SET_RATE_PARENT;
}

- if (caps & (CGU_CLK_MUX | CGU_CLK_CUSTOM)) {
+ if (caps & (CGU_CLK_PLL | CGU_CLK_MUX | CGU_CLK_CUSTOM)) {
clk_init.num_parents = 0;

if (caps & CGU_CLK_MUX)
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index bfc2b9c..30d575d 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -18,6 +18,10 @@
* struct ingenic_cgu_pll_info - information about a PLL
* @reg: the offset of the PLL's control register within the CGU
* @rate_multiplier: the multiplier needed by pll rate calculation
+ * @mux_shift: the number of bits to shift the mux value by (ie. the
+ * index of the lowest bit of the mux value in the I2S PLL's
+ * control register)
+ * @mux_bits: the size of the mux field in bits
* @m_shift: the number of bits to shift the multiplier value by (ie. the
* index of the lowest bit of the multiplier value in the PLL's
* control register)
@@ -42,19 +46,21 @@
* @bypass_bit: the index of the bypass bit in the PLL control register, or
* -1 if there is no bypass bit
* @enable_bit: the index of the enable bit in the PLL control register
- * @stable_bit: the index of the stable bit in the PLL control register
+ * @stable_bit: the index of the stable bit in the PLL control register, or
+ * -1 if there is no stable bit
*/
struct ingenic_cgu_pll_info {
unsigned reg;
unsigned rate_multiplier;
const s8 *od_encoding;
+ u8 mux_shift, mux_bits;
u8 m_shift, m_bits, m_offset;
u8 n_shift, n_bits, n_offset;
u8 od_shift, od_bits, od_max;
unsigned bypass_reg;
s8 bypass_bit;
u8 enable_bit;
- u8 stable_bit;
+ s8 stable_bit;
void (*calc_m_n_od)(const struct ingenic_cgu_pll_info *pll_info,
unsigned long rate, unsigned long parent_rate,
unsigned int *m, unsigned int *n, unsigned int *od);
--
2.7.4
\
 
 \ /
  Last update: 2021-07-24 11:36    [W:0.161 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site