lkml.org 
[lkml]   [2021]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] PCI: qcom: Split init and enable for 1.9.0 and 2.7.0
Date
On the sc8180x platform the "msi" interrupt often fires before init has
a chance to enable the clocks that are necessary for the interrupt
handler to access the hardware.

Split out the resource enablement and disablement into the newly
introduce enable/disable resource operations, to ensure that the
necessary resources are enabled when needed.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 31 +++++++++++++++++---------
1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 8a64a126de2b..8adcbb718832 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1173,12 +1173,11 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
return PTR_ERR_OR_ZERO(res->pipe_clk);
}

-static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
+static int qcom_pcie_enable_2_7_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- u32 val;
int ret;

ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
@@ -1211,6 +1210,20 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
goto err_disable_clocks;
}

+ return 0;
+
+err_disable_clocks:
+ clk_bulk_disable_unprepare(res->num_clks, res->clks);
+err_disable_regulators:
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+
+ return ret;
+}
+
+static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
+{
+ u32 val;
+
/* configure PCIe to RC mode */
writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE);

@@ -1238,15 +1251,9 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
}

return 0;
-err_disable_clocks:
- clk_bulk_disable_unprepare(res->num_clks, res->clks);
-err_disable_regulators:
- regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-
- return ret;
}

-static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
+static void qcom_pcie_disable_2_7_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;

@@ -1465,8 +1472,9 @@ static const struct qcom_pcie_ops ops_2_3_3 = {
/* Qcom IP rev.: 2.7.0 Synopsys IP rev.: 4.30a */
static const struct qcom_pcie_ops ops_2_7_0 = {
.get_resources = qcom_pcie_get_resources_2_7_0,
+ .enable_resources = qcom_pcie_enable_2_7_0,
.init = qcom_pcie_init_2_7_0,
- .deinit = qcom_pcie_deinit_2_7_0,
+ .disable_resources = qcom_pcie_disable_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.post_init = qcom_pcie_post_init_2_7_0,
.post_deinit = qcom_pcie_post_deinit_2_7_0,
@@ -1475,8 +1483,9 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
/* Qcom IP rev.: 1.9.0 */
static const struct qcom_pcie_ops ops_1_9_0 = {
.get_resources = qcom_pcie_get_resources_2_7_0,
+ .enable_resources = qcom_pcie_enable_2_7_0,
.init = qcom_pcie_init_2_7_0,
- .deinit = qcom_pcie_deinit_2_7_0,
+ .disable_resources = qcom_pcie_disable_2_7_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
.post_init = qcom_pcie_post_init_2_7_0,
.post_deinit = qcom_pcie_post_deinit_2_7_0,
--
2.29.2
\
 
 \ /
  Last update: 2021-07-25 06:03    [W:0.192 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site