lkml.org 
[lkml]   [2021]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: qcom: sc7280: Add gpu support
Quoting Akhil P Oommen (2021-07-23 04:20:54)
> Add the necessary dt nodes for gpu support in sc7280.
>
> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
> ---
> This patch has dependency on the GPUCC bindings patch here:
> https://patchwork.kernel.org/project/linux-arm-msm/patch/1619519590-3019-4-git-send-email-tdas@codeaurora.org/
>
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 107 +++++++++++++++++++++++++++++++++++
> 1 file changed, 107 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 029723a..beb313c 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -16,6 +16,8 @@
> #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/interconnect/qcom,sc7280.h>
> +#include <dt-bindings/clock/qcom,gpucc-sc7280.h>

Please sort this alphabetically.

>
> / {
> interrupt-parent = <&intc>;
> @@ -592,6 +594,111 @@
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> + gpu: gpu@3d00000 {

Will this label be used? If not, please don't add it.

> + compatible = "qcom,adreno-635.0", "qcom,adreno";
> + #stream-id-cells = <16>;
> + reg = <0 0x03d00000 0 0x40000>, <0 0x03d9e000 0 0x1000>,
> + <0 0x03d61000 0 0x800>;
> + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";

I'd prefer to see one reg and reg-names per line if the list is longer
than one line.

reg = < >,
< >,
< >;
reg-names = " ",
" ",
" ";

It makes is much easier to figure out which property lines up with which
name.

> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> + iommus = <&adreno_smmu 0 0x401>;
> + operating-points-v2 = <&gpu_opp_table>;
> + qcom,gmu = <&gmu>;
> + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "gfx-mem";
> +
> + gpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-550000000 {
> + opp-hz = /bits/ 64 <550000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + opp-peak-kBps = <6832000>;
> + };
> +
> + opp-450000000 {
> + opp-hz = /bits/ 64 <450000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + opp-peak-kBps = <4068000>;
> + };
> +
> + opp-315000000 {
> + opp-hz = /bits/ 64 <315000000>;
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + opp-peak-kBps = <1804000>;
> + };
> + };
> + };
> +
> + adreno_smmu: iommu@3da0000 {

3da0000 comes after 3d69000, please sort this by unit address.

> + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
> + reg = <0 0x03da0000 0 0x20000>;
> + #iommu-cells = <2>;
> + #global-interrupts = <2>;
> + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
> + <&gpucc GPU_CC_AHB_CLK>,
> + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
> + <&gpucc GPU_CC_CX_GMU_CLK>,
> + <&gpucc GPU_CC_HUB_CX_INT_CLK>,
> + <&gpucc GPU_CC_HUB_AON_CLK>;
> + clock-names = "gcc_gpu_memnoc_gfx_clk",
> + "gcc_gpu_snoc_dvm_gfx_clk",
> + "gpu_cc_ahb_clk",
> + "gpu_cc_hlos1_vote_gpu_smmu_clk",
> + "gpu_cc_cx_gmu_clk",
> + "gpu_cc_hub_cx_int_clk",
> + "gpu_cc_hub_aon_clk";
> +
> + power-domains = <&gpucc GPU_CC_CX_GDSC>;
> + };
> +
> + gmu: gmu@3d69000 {
> + compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
> + reg = <0 0x03d6a000 0 0x34000>,
> + <0 0x3de0000 0 0x10000>,
> + <0 0x0b290000 0 0x10000>;
> + reg-names = "gmu", "rscc", "gmu_pdc";
> + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hfi", "gmu";
> + clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
> + <&gpucc GPU_CC_CXO_CLK>,
> + <&gcc GCC_DDRSS_GPU_AXI_CLK>,
> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> + <&gpucc GPU_CC_AHB_CLK>,
> + <&gpucc GPU_CC_HUB_CX_INT_CLK>,
> + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
> + clock-names = "gmu", "cxo", "axi", "memnoc", "ahb",
> + "hub", "smmu_vote";

Same comment about one line per clock for clock-names so we can easily
match them up.

> + power-domains = <&gpucc GPU_CC_CX_GDSC>, <&gpucc GPU_CC_GX_GDSC>;
> + power-domain-names = "cx", "gx";
> + iommus = <&adreno_smmu 5 0x400>;
> + operating-points-v2 = <&gmu_opp_table>;
> +

\
 
 \ /
  Last update: 2021-07-24 03:32    [W:1.672 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site