lkml.org 
[lkml]   [2021]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] vhci_hcd: USB port can get stuck in the disabled state
From
Date
On 7/21/21 8:27 PM, Michael wrote:
> You can pass through any bluetooth dongle (or xbox wireless dongle) through usbip and it will cause this issue.
>
> For example, here is one of my customers https://www.virtualhere.com/comment/9432#comment-9432 <https://www.virtualhere.com/comment/9432#comment-9432> with the issue.
>
> The device is in the VDEV_ST_USED state when a reset occurs and so its never re-enabled
>
> Furthermore there is a bug in the line pr_err("vhci_device speed not set\n");
> (L479) because resetting a full-speed device is not an error.
>

Can you provide me the full demsg from host and client including the part
where device is attached? I assume usbip tools from Linux sources are used?

Also send me lsusb output on host and client

thanks,
-- Shuah

\
 
 \ /
  Last update: 2021-07-23 18:30    [W:0.090 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site