lkml.org 
[lkml]   [2021]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.13 046/156] arm64: dts: qcom: sm8350: fix the node unit addresses
    Date
    From: Vinod Koul <vkoul@kernel.org>

    [ Upstream commit 1dee9e3b0997fef7170f7ea2d8eab47d0cd334d8 ]

    Some node unit addresses were put wrongly in the dts, resulting in
    below warning when run with W=1

    arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000"
    arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000"
    arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000"

    Fix by correcting to the correct address as given in reg node

    Reviewed-by: Robert Foss <robert.foss@linaro.org>
    Signed-off-by: Vinod Koul <vkoul@kernel.org>
    Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org
    Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm64/boot/dts/qcom/sm8350.dtsi | 6 +++---
    1 file changed, 3 insertions(+), 3 deletions(-)

    diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
    index ed0b51bc03ea..a2382eb8619b 100644
    --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
    +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
    @@ -689,7 +689,7 @@
    interrupt-controller;
    };

    - tsens0: thermal-sensor@c222000 {
    + tsens0: thermal-sensor@c263000 {
    compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
    reg = <0 0x0c263000 0 0x1ff>, /* TM */
    <0 0x0c222000 0 0x8>; /* SROT */
    @@ -700,7 +700,7 @@
    #thermal-sensor-cells = <1>;
    };

    - tsens1: thermal-sensor@c223000 {
    + tsens1: thermal-sensor@c265000 {
    compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
    reg = <0 0x0c265000 0 0x1ff>, /* TM */
    <0 0x0c223000 0 0x8>; /* SROT */
    @@ -1176,7 +1176,7 @@
    };
    };

    - dc_noc: interconnect@90e0000 {
    + dc_noc: interconnect@90c0000 {
    compatible = "qcom,sm8350-dc-noc";
    reg = <0 0x090c0000 0 0x4200>;
    #interconnect-cells = <1>;
    --
    2.30.2


    \
     
     \ /
      Last update: 2021-07-22 19:35    [W:8.758 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site