lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectFwd: [PATCH 1/2] dt-bindings: display: panel: Add ilitek ili9341 panel bindings
Hi Linus,

Thanks for your detailed reply.

On Sun, 18 Jul 2021 at 08:17, Linus Walleij <linus.walleij@linaro.org> wrote:
>
> Hi Dillon,
>
> thanks for your patch!
>
> On Fri, Jul 16, 2021 at 12:20 PM <dillon.minfei@gmail.com> wrote:
>
> > From: Dillon Min <dillon.minfei@gmail.com>
> >
> > Add documentation for "ilitek,ili9341" panel.
> >
> > Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
>
> > + dc-gpios:
> > + maxItems: 1
> > + description: Display data/command selection (D/CX)
>
> This is a DBI feature so mention in the description that this is a
> DBI panel.


Okay, I will add the DBI panel to v2.

>
>
> > + spi-3wire: true
> > +
> > + spi-max-frequency:
> > + const: 10000000
> > +
> > + port: true
> > +
> > +additionalProperties: false
>
> Please add regulator supplies for the power lines, it's fine
> not to implement code handling them in the driver but they
> should be in the bindings.
>
> For the ili9341 it should be
>
> vci-supply:
> description: Analog voltage supply (2.5 .. 3.3V)
>
> vddi-supply:
> description: Voltage supply for interface logic (1.65 .. 3.3 V)
>
> vddi-led-supply:
> description: Voltage supply for the LED driver (1.65 .. 3.3 V)
>

Thanks so much, I will add it to v2.

>
> Yours,
> Linus Walleij

\
 
 \ /
  Last update: 2021-07-21 10:14    [W:0.046 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site