lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v3.2 07/29] mmc: core: UHS-II support, set APP_CMD bit if necessary
Date
In UHS-II mode, MMC_APP_CMD command need not to be sent.
Instead, APP_CMD bit in a packet should be set.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
drivers/mmc/core/sd_ops.c | 9 +++++++++
drivers/mmc/core/uhs2.c | 4 ++++
2 files changed, 13 insertions(+)

diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index baa05a6a36c4..279d676cd5e6 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -26,6 +26,15 @@ int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
if (WARN_ON(card && card->host != host))
return -EINVAL;

+ /* UHS2 packet has APP bit so only set APP_CMD flag here.
+ * Will set the APP bit when assembling UHS2 packet.
+ */
+ if (host->flags & MMC_UHS2_SUPPORT &&
+ host->flags & MMC_UHS2_INITIALIZED) {
+ host->flags |= MMC_UHS2_APP_CMD;
+ return 0;
+ }
+
cmd.opcode = MMC_APP_CMD;

if (card) {
diff --git a/drivers/mmc/core/uhs2.c b/drivers/mmc/core/uhs2.c
index 1f6d0e0cf355..c0d61e7d9e4b 100644
--- a/drivers/mmc/core/uhs2.c
+++ b/drivers/mmc/core/uhs2.c
@@ -835,6 +835,10 @@ int uhs2_prepare_sd_cmd(struct mmc_host *host, struct mmc_request *mrq)
header |= UHS2_PACKET_TYPE_CCMD;

arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS;
+ if (host->flags & MMC_UHS2_APP_CMD) {
+ arg |= UHS2_SD_CMD_APP;
+ host->flags &= ~MMC_UHS2_APP_CMD;
+ }

uhs2_cmd = cmd->uhs2_cmd;
payload = uhs2_cmd->payload;
--
2.32.0
\
 
 \ /
  Last update: 2021-07-22 06:03    [W:0.478 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site