lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 02/11] dt-bindings: memory: mediatek: Add mt8195 smi sub common
On Thu, Jul 15, 2021 at 08:12:00PM +0800, Yong Wu wrote:
> Add the binding for smi-sub-common. The SMI block diagram like this:
>
> IOMMU
> | |
> smi-common
> ------------------
> | .... |
> larb0 larb7 <-max is 8
>
> The smi-common connects with smi-larb and IOMMU. The maximum larbs number
> that connects with a smi-common is 8. If the engines number is over 8,
> sometimes we use a smi-sub-common which is nearly same with smi-common.
> It supports up to 8 input and 1 output(smi-common has 2 output)
>
> Something like:
>
> IOMMU
> | |
> smi-common
> ---------------------
> | | ...
> larb0 sub-common ... <-max is 8
> -----------
> | | ... <-max is 8 too.
> larb2 larb5
>
> We don't need extra SW setting for smi-sub-common, only the sub-common has
> special clocks need to enable when the engines access dram.
>
> If it is sub-common, it should have a "mediatek,smi" phandle to point to
> its smi-common. meanwhile, the sub-common only has one gals clock.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> .../mediatek,smi-common.yaml | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> index 602592b6c3f5..f79d99ebc440 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -38,6 +38,7 @@ properties:
> - mediatek,mt8192-smi-common
> - mediatek,mt8195-smi-common-vdo
> - mediatek,mt8195-smi-common-vpp
> + - mediatek,mt8195-smi-sub-common
>
> - description: for mt7623
> items:
> @@ -67,6 +68,10 @@ properties:
> minItems: 2
> maxItems: 4
>
> + mediatek,smi:
> + $ref: /schemas/types.yaml#/definitions/phandle-array

If only a phandle, then s/phandle-array/phandle/

> + description: a phandle to the smi-common node above. Only for sub-common.
> +
> required:
> - compatible
> - reg
> @@ -93,6 +98,26 @@ allOf:
> - const: smi
> - const: async
>
> + - if: # only for sub common
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt8195-smi-sub-common
> + then:
> + required:
> + - mediatek,smi
> + properties:
> + clock:
> + items:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: apb
> + - const: smi
> + - const: gals0
> +
> - if: # for gen2 HW that have gals
> properties:
> compatible:
> --
> 2.18.0
>
>

\
 
 \ /
  Last update: 2021-07-22 04:54    [W:0.215 / U:2.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site