lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] net: dsa: ensure linearized SKBs in case of tail taggers
Date
The function skb_put() that is used by tail taggers to make room for the
DSA tag must only be called for linearized SKBS. However in case that the
slave device inherited features like NETIF_F_HW_SG or NETIF_F_FRAGLIST the
SKB passed to the slaves transmit function may not be linearized.
Avoid those SKBs by clearing the NETIF_F_HW_SG and NETIF_F_FRAGLIST flags
for tail taggers.
Furthermore since the tagging protocol can be changed at runtime move the
code for setting up the slaves features into dsa_slave_setup_tagger().

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
---
net/dsa/slave.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 22ce11cd770e..ae2a648ed9be 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1808,6 +1808,7 @@ void dsa_slave_setup_tagger(struct net_device *slave)
struct dsa_slave_priv *p = netdev_priv(slave);
const struct dsa_port *cpu_dp = dp->cpu_dp;
struct net_device *master = cpu_dp->master;
+ const struct dsa_switch *ds = dp->ds;

slave->needed_headroom = cpu_dp->tag_ops->needed_headroom;
slave->needed_tailroom = cpu_dp->tag_ops->needed_tailroom;
@@ -1819,6 +1820,14 @@ void dsa_slave_setup_tagger(struct net_device *slave)
slave->needed_tailroom += master->needed_tailroom;

p->xmit = cpu_dp->tag_ops->xmit;
+
+ slave->features = master->vlan_features | NETIF_F_HW_TC;
+ if (ds->ops->port_vlan_add && ds->ops->port_vlan_del)
+ slave->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+ slave->hw_features |= NETIF_F_HW_TC;
+ slave->features |= NETIF_F_LLTX;
+ if (slave->needed_tailroom)
+ slave->features &= ~(NETIF_F_SG | NETIF_F_FRAGLIST);
}

static struct lock_class_key dsa_slave_netdev_xmit_lock_key;
@@ -1881,11 +1890,6 @@ int dsa_slave_create(struct dsa_port *port)
if (slave_dev == NULL)
return -ENOMEM;

- slave_dev->features = master->vlan_features | NETIF_F_HW_TC;
- if (ds->ops->port_vlan_add && ds->ops->port_vlan_del)
- slave_dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
- slave_dev->hw_features |= NETIF_F_HW_TC;
- slave_dev->features |= NETIF_F_LLTX;
slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
if (!is_zero_ether_addr(port->mac))
ether_addr_copy(slave_dev->dev_addr, port->mac);
--
2.32.0
\
 
 \ /
  Last update: 2021-07-22 01:56    [W:0.096 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site