lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v5] iomap: support tail packing inline read
On Wed, Jul 21, 2021 at 04:23:23PM +0800, Gao Xiang wrote:
> This tries to add tail packing inline read to iomap, which can support
> several inline tail blocks. Similar to the previous approach, it cleans
> post-EOF in one iteration.
>
> The write path remains untouched since EROFS cannot be used for testing.
> It'd be better to be implemented if upcoming real users care rather than
> leave untested dead code around.

I had a conversation with Gao on IRC this morning, and I think I've
finally gotten up to speed on where he's trying to go with this
patchset. Maybe that will make review of this patch easier, or at least
not muddy the waters further.

Right now, inline data in iomap serves exactly two users -- gfs2 and
ext4. ext4 doesn't use iomap for buffered IO and doesn't support
directio for inline data files, so we can ignore them for now. gfs2
uses iomap for buffered IO, and it stores the inline data after the
gfs2_dinode.

iomap's inline data functions exist to serve the gfs2 use case, which is
why the code has baked-in assumptions that iomap->offset is always zero,
and the length is never more than a page.

It used to be the case that we'd always attach an iomap_page to a page
for blocksize < pagesize files, but as of 5.14-rc2 we're starting to
move towards creating and dropping them on demand. IOWs, reads from
inline data files always read the entire file contents into the page so
we mark the whole page uptodate and do not attach an iomap_page (unlike
regular reads). Writes don't attach an iomap_page to inline data files.
Writeback attaches an iomap_page.

Did I get that much right? Onto the erofs part, now that I've also
taken the time to figure out what it's doing by reading the ondisk
format in Documentation/. (Thanks for that, erofs developers!)

erofs can perform tail packing to reduce internal block fragmentation.
Tails of files are written immediately after the ondisk inode, which is
why Gao wants to use IOMAP_INLINE for this. Note that erofs tailpacking
is /not/ same as what reiserfs does, and the inlinedata model is /not/
the same as what gfs2 does.

A tail-packed erofs file mapping looks like this:

x = round_down(i_size, blocksize);
[0..(x - 1)]: mapped to a range of external blocks
[x..(i_size - 1)]: inline data immediately after the inode

The previous discussions have gone a bit afield -- there's only one
inline data region per file, it won't cross a page boundary because
erofs requires blocksize == pagesize, and it's always at the end of the
file. I don't know how we got onto the topic of multiple inline data
regions or encoded regions in the middle of a file, but that's not on
anybody's requirement list today, AFAICT.

I suspect that adapting the inlinedata code to support regions that
don't start at offset zero but are otherwise page-aligned can be done
with fairly minor changes to the accounting, since I think that largely
can be done by removing the asserts about offset==0.

Did I get that right?

The next thing the erofs developers want to do is add support for
blocksize < pagesize, presumably so that they can mount a 4k blocksize
erofs volume on a machine with 64k pages. For that, I think erofs needs
to be able to read the tail bytes into the middle of an existing page.
Hence the need to update the per-block uptodate bits in the iomap_page
from the read function, and all the math changes where we increase the
starting address of a copy by (iomap->offset - pos). The end result
should be that we can handle inline data regions anywhere, though we
won't really have a way to test that until erofs starts supporting
blocksize < pagesize.

Assuming that my assumptions are correct, I think this patch decomposes
into three more targeted changes, one of which applies now, and the rest
which will go with the later effort.

1) Update the code to handle inline data mappings where iomap->offset is
not zero but the start of the mapping is always page-aligned.

2) Adapt the inline data code to create and update the iop as
appropriate. This could be a little tricky since I've seen elsewhere in
the v4 discussion thread that people like the idea of not paying the iop
overhead for pages that are backed by a single extent even when bs < ps.
I suspect we have enough to decide this from the *iomap/*srcmap length
in iomap_readpage_actor or iomap_write_begin, though I've not written
any code that tries that.

3) Update the code to handle inline data mappings where iomap->offset
can point to the middle of a page.

My apologies if everyone else already figured all of this out; for all I
know I'm merely scrawling this here as notes to refer back to for future
discussions.

> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Darrick J. Wong <djwong@kernel.org>
> Cc: Matthew Wilcox <willy@infradead.org>
> Cc: Andreas Gruenbacher <andreas.gruenbacher@gmail.com>
> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
> ---
> v4: https://lore.kernel.org/r/20210720133554.44058-1-hsiangkao@linux.alibaba.com
> changes since v4:
> - turn to WARN_ON_ONCE() suggested by Darrick;
> - fix size to "min(iomap->length + iomap->offset - pos,
> PAGE_SIZE - poff)"
>
> fs/iomap/buffered-io.c | 58 +++++++++++++++++++++++++++---------------
> fs/iomap/direct-io.c | 13 +++++++---
> 2 files changed, 47 insertions(+), 24 deletions(-)
>
> diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
> index 87ccb3438bec..d8436d34a159 100644
> --- a/fs/iomap/buffered-io.c
> +++ b/fs/iomap/buffered-io.c
> @@ -205,25 +205,27 @@ struct iomap_readpage_ctx {
> struct readahead_control *rac;
> };
>
> -static void
> +static int
> iomap_read_inline_data(struct inode *inode, struct page *page,
> - struct iomap *iomap)
> + struct iomap *iomap, loff_t pos)
> {
> - size_t size = i_size_read(inode);
> + unsigned int size, poff = offset_in_page(pos);
> void *addr;
>
> - if (PageUptodate(page))
> - return;
> -
> - BUG_ON(page_has_private(page));
> - BUG_ON(page->index);
> - BUG_ON(size > PAGE_SIZE - offset_in_page(iomap->inline_data));
> + /* inline source data must be inside a single page */
> + if (WARN_ON_ONCE(iomap->length > PAGE_SIZE -
> + offset_in_page(iomap->inline_data)))
> + return -EIO;
> + /* handle tail-packing blocks cross the current page into the next */
> + size = min_t(unsigned int, iomap->length + iomap->offset - pos,
> + PAGE_SIZE - poff);

Part of my confusion has resulted from this comment -- now that I think
I understand the problem domain better, I realize that the clamping code
here is not because erofs will hand us a tail-packing iomap that crosses
page boundaries; this clamp simply protects us from memory corruption.

/*
* iomap->inline_data is a kernel-mapped memory page, so we must
* terminate the read at the end of that page.
*/
if (WARN_ON_ONCE(...))
return -EIO;
size = min_t(...);

TBH I wonder if we merely need a rule that ->iomap_begin must not hand
back an inline data mapping that crosses a page, since I think the
check in the previous line is sufficient.

> addr = kmap_atomic(page);
> - memcpy(addr, iomap->inline_data, size);
> - memset(addr + size, 0, PAGE_SIZE - size);
> + memcpy(addr + poff, iomap->inline_data - iomap->offset + pos, size);

I keep seeing this (iomap->inline_data + pos - iomap->offset)
construction in this patch, maybe it should be a helper?

> + memset(addr + poff + size, 0, PAGE_SIZE - poff - size);
> kunmap_atomic(addr);
> - SetPageUptodate(page);
> + iomap_set_range_uptodate(page, poff, PAGE_SIZE - poff);
> + return PAGE_SIZE - poff;
> }
>
> static inline bool iomap_block_needs_zeroing(struct inode *inode,
> @@ -245,19 +247,23 @@ iomap_readpage_actor(struct inode *inode, loff_t pos, loff_t length, void *data,
> loff_t orig_pos = pos;
> unsigned poff, plen;
> sector_t sector;
> + int ret;
>
> - if (iomap->type == IOMAP_INLINE) {
> - WARN_ON_ONCE(pos);
> - iomap_read_inline_data(inode, page, iomap);
> - return PAGE_SIZE;
> - }
> -
> - /* zero post-eof blocks as the page may be mapped */
> iop = iomap_page_create(inode, page);
> + /* needs to skip some leading uptodate blocks */
> iomap_adjust_read_range(inode, iop, &pos, length, &poff, &plen);
> if (plen == 0)
> goto done;
>
> + if (iomap->type == IOMAP_INLINE) {
> + ret = iomap_read_inline_data(inode, page, iomap, pos);
> + if (ret < 0)
> + return ret;
> + plen = ret;
> + goto done;
> + }
> +
> + /* zero post-eof blocks as the page may be mapped */
> if (iomap_block_needs_zeroing(inode, iomap, pos)) {
> zero_user(page, poff, plen);
> iomap_set_range_uptodate(page, poff, plen);
> @@ -589,6 +595,18 @@ __iomap_write_begin(struct inode *inode, loff_t pos, unsigned len, int flags,
> return 0;
> }
>
> +static int iomap_write_begin_inline(struct inode *inode, loff_t pos,
> + struct page *page, struct iomap *srcmap)
> +{
> + /* needs more work for the tailpacking case, disable for now */
> + if (WARN_ON_ONCE(srcmap->offset != 0))
> + return -EIO;
> + if (PageUptodate(page))
> + return 0;
> + iomap_read_inline_data(inode, page, srcmap, 0);
> + return 0;
> +}
> +
> static int
> iomap_write_begin(struct inode *inode, loff_t pos, unsigned len, unsigned flags,
> struct page **pagep, struct iomap *iomap, struct iomap *srcmap)
> @@ -618,7 +636,7 @@ iomap_write_begin(struct inode *inode, loff_t pos, unsigned len, unsigned flags,
> }
>
> if (srcmap->type == IOMAP_INLINE)
> - iomap_read_inline_data(inode, page, srcmap);
> + status = iomap_write_begin_inline(inode, pos, page, srcmap);
> else if (iomap->flags & IOMAP_F_BUFFER_HEAD)
> status = __block_write_begin_int(page, pos, len, NULL, srcmap);
> else
> diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
> index 9398b8c31323..cbadb99fb88c 100644
> --- a/fs/iomap/direct-io.c
> +++ b/fs/iomap/direct-io.c
> @@ -379,22 +379,27 @@ iomap_dio_inline_actor(struct inode *inode, loff_t pos, loff_t length,
> {
> struct iov_iter *iter = dio->submit.iter;
> size_t copied;
> + void *dst = iomap->inline_data + pos - iomap->offset;
>
> - BUG_ON(pos + length > PAGE_SIZE - offset_in_page(iomap->inline_data));
> + /* inline data must be inside a single page */
> + if (WARN_ON_ONCE(length > PAGE_SIZE -
> + offset_in_page(iomap->inline_data)))
> + return -EIO;

/*
* iomap->inline_data is a kernel-mapped memory page, so we must
* terminate the write at the end of that page.
*/
if (WARN_ON_ONCE(...))
return -EIO;

> if (dio->flags & IOMAP_DIO_WRITE) {

I thought we weren't allowing writes to an inline mapping unless
iomap->offset == 0? Why is it necessary to change the directio write
path? Shouldn't this be:

/* needs more work for the tailpacking case, disable for now */
if (WARN_ON_ONCE(pos > 0))
return -EIO;

--D

> loff_t size = inode->i_size;
>
> if (pos > size)
> - memset(iomap->inline_data + size, 0, pos - size);
> - copied = copy_from_iter(iomap->inline_data + pos, length, iter);
> + memset(iomap->inline_data + size - iomap->offset,
> + 0, pos - size);
> + copied = copy_from_iter(dst, length, iter);
> if (copied) {
> if (pos + copied > size)
> i_size_write(inode, pos + copied);
> mark_inode_dirty(inode);
> }
> } else {
> - copied = copy_to_iter(iomap->inline_data + pos, length, iter);
> + copied = copy_to_iter(dst, length, iter);
> }
> dio->size += copied;
> return copied;
> --
> 2.24.4
>

\
 
 \ /
  Last update: 2021-07-22 00:25    [W:0.073 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site