lkml.org 
[lkml]   [2021]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v1 net-next 1/1] net: ethernet: ti: cpsw: allow MTU > 1500 when overridden by module parameter
Date
The module parameter rx_packet_max can be overridden at module load or
boot args. But it doesn't adjust the max_mtu for the device accordingly.

If a CPSW device is to be used in a DSA architecture, increasing the
MTU by small amounts to account for switch overhead becomes necessary.
This way, a boot arg of cpsw.rx_packet_max=1600 should allow the MTU
to be increased to values of 1520, which is necessary for DSA tagging
protocols like "ocelot" and "seville".

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
drivers/net/ethernet/ti/cpsw.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index c0cd7de88316..d400163c4ef2 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1625,6 +1625,14 @@ static int cpsw_probe(struct platform_device *pdev)
goto clean_cpts;
}

+ /* adjust max_mtu to match module parameter rx_packet_max */
+ if (cpsw->rx_packet_max > CPSW_MAX_PACKET_SIZE) {
+ ndev->max_mtu = ETH_DATA_LEN + (cpsw->rx_packet_max -
+ CPSW_MAX_PACKET_SIZE);
+ dev_info(dev, "overriding default MTU to %d\n\n",
+ ndev->max_mtu);
+ }
+
priv = netdev_priv(ndev);
priv->cpsw = cpsw;
priv->ndev = ndev;
--
2.25.1
\
 
 \ /
  Last update: 2021-07-21 23:08    [W:0.088 / U:25.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site