lkml.org 
[lkml]   [2021]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 6/6] clk: stm32mp1: Switch to clk_divider.determine_rate
Date
.determine_rate is meant to replace .round_rate in CCF in the future.
Switch over to .determine_rate now that clk_divider_ops has gained
support for that.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/clk-stm32mp1.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index 256575bd29b9..4bd1fe7d8af4 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -1076,14 +1076,10 @@ static int clk_divider_rtc_set_rate(struct clk_hw *hw, unsigned long rate,

static int clk_divider_rtc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
- unsigned long best_parent_rate = req->best_parent_rate;
+ if (req->best_parent_hw == clk_hw_get_parent_by_index(hw, HSE_RTC))
+ return clk_divider_ops.determine_rate(hw, req);

- if (req->best_parent_hw == clk_hw_get_parent_by_index(hw, HSE_RTC)) {
- req->rate = clk_divider_ops.round_rate(hw, req->rate, &best_parent_rate);
- req->best_parent_rate = best_parent_rate;
- } else {
- req->rate = best_parent_rate;
- }
+ req->rate = req->best_parent_rate;

return 0;
}
--
2.32.0
\
 
 \ /
  Last update: 2021-07-03 00:53    [W:0.184 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site