Messages in this thread | | | Date | Fri, 2 Jul 2021 16:15:06 +0300 | From | Laurent Pinchart <> | Subject | Re: [PATCH v3 3/6] dt-bindings: media: mt9p031: Add missing required properties |
| |
Hi Stefan,
Thank you for the patch.
On Fri, Jul 02, 2021 at 11:59:19AM +0200, Stefan Riedmueller wrote: > Add missing required clocks and supply regulator properties for the > sensor input clock and vdd, vdd_io and vaa supply regulators.
Can I volunteer you to convert these bindings to YAML first, and add the properties on top ? :-)
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> > --- > .../devicetree/bindings/media/i2c/mt9p031.txt | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > index cb60443ff78f..4437d0e3147d 100644 > --- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > +++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > @@ -9,6 +9,12 @@ Required Properties: > (a) "aptina,mt9p031" for mt9p031 sensor > (b) "aptina,mt9p031m" for mt9p031m sensor > > +- clocks: Reference to the sensor input clock > + > +- vdd-supply: VDD supply regulator > +- vdd_io-supply: VDD_IO supply regulator > +- vaa-supply: VAA supply regulator > + > - input-clock-frequency: Input clock frequency. > > - pixel-clock-frequency: Pixel clock frequency. > @@ -29,6 +35,12 @@ Example: > reg = <0x5d>; > reset-gpios = <&gpio3 30 0>; > > + clocks = <&sensor_clk>; > + > + vdd-supply = <®_vdd>; > + vdd_io-supply = <®_vdd_io>; > + vaa-supply = <®_vaa>; > + > port { > mt9p031_1: endpoint { > input-clock-frequency = <6000000>;
-- Regards,
Laurent Pinchart
| |