lkml.org 
[lkml]   [2021]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
From
Subject[PATCH v2] qla2xxx: synchronize rport dev_loss_tmo setting
Date
From: Hannes Reinecke <hare@suse.de>

Currently, the dev_loss_tmo setting is only ever used for SCSI
devices. This patch reshuffles initialisation such that the SCSI
remote ports are registered before the NVMe ones, allowing the
dev_loss_tmo setting to be synchronized between SCSI and NVMe.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
[lkp: Do not depend on nvme_fc_set_remoteport_devloss() for !NVME_FC]
Reported-by: kernel test robot <lkp@intel.com>
---

This patch got some more testing by one of our partners. So far, no
regression identified.

changes v2:
- fixed build failure for !NVME_FC reported by lkp

drivers/scsi/qla2xxx/qla_attr.c | 6 ++++++
drivers/scsi/qla2xxx/qla_init.c | 10 +++-------
drivers/scsi/qla2xxx/qla_nvme.c | 5 ++++-
3 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 3aa9869f6fae..dad48a982804 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2648,7 +2648,13 @@ qla2x00_get_starget_port_id(struct scsi_target *starget)
static inline void
qla2x00_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
{
+ fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+
rport->dev_loss_tmo = timeout ? timeout : 1;
+
+ if (IS_ENABLED(CONFIG_NVME_FC) && fcport->nvme_remote_port)
+ nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port,
+ rport->dev_loss_tmo);
}

static void
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 0de250570e39..d078f16933c0 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5631,13 +5631,6 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)

qla2x00_dfs_create_rport(vha, fcport);

- if (NVME_TARGET(vha->hw, fcport)) {
- qla_nvme_register_remote(vha, fcport);
- qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_COMPLETE);
- qla2x00_set_fcport_state(fcport, FCS_ONLINE);
- return;
- }
-
qla24xx_update_fcport_fcp_prio(vha, fcport);

switch (vha->host->active_mode) {
@@ -5659,6 +5652,9 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
break;
}

+ if (NVME_TARGET(vha->hw, fcport))
+ qla_nvme_register_remote(vha, fcport);
+
qla2x00_set_fcport_state(fcport, FCS_ONLINE);

if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 0cacb667a88b..678083a34e4d 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -41,7 +41,7 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
req.port_name = wwn_to_u64(fcport->port_name);
req.node_name = wwn_to_u64(fcport->node_name);
req.port_role = 0;
- req.dev_loss_tmo = 0;
+ req.dev_loss_tmo = fcport->dev_loss_tmo;

if (fcport->nvme_prli_service_param & NVME_PRLI_SP_INITIATOR)
req.port_role = FC_PORT_ROLE_NVME_INITIATOR;
@@ -68,6 +68,9 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
return ret;
}

+ nvme_fc_set_remoteport_devloss(fcport->nvme_remote_port,
+ fcport->dev_loss_tmo);
+
if (fcport->nvme_prli_service_param & NVME_PRLI_SP_SLER)
ql_log(ql_log_info, vha, 0x212a,
"PortID:%06x Supports SLER\n", req.port_id);
--
2.29.2
\
 
 \ /
  Last update: 2021-07-02 11:21    [W:0.035 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site