lkml.org 
[lkml]   [2021]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.9 155/245] Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.
    Date
    From: Tim Jiang <tjiang@codeaurora.org>

    [ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]

    This is btsoc timing issue, after host start to downloading bt firmware,
    ep2 need time to switch from function acl to function dfu, so host add
    20ms delay as workaround.

    Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
    Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/bluetooth/btusb.c | 5 +++++
    1 file changed, 5 insertions(+)

    diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
    index 4e3b24a0511f..30c09b9ddbf0 100644
    --- a/drivers/bluetooth/btusb.c
    +++ b/drivers/bluetooth/btusb.c
    @@ -2508,6 +2508,11 @@ static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
    sent += size;
    count -= size;

    + /* ep2 need time to switch from function acl to function dfu,
    + * so we add 20ms delay here.
    + */
    + msleep(20);
    +
    while (count) {
    size = min_t(size_t, count, QCA_DFU_PACKET_LEN);

    --
    2.30.2


    \
     
     \ /
      Last update: 2021-07-19 17:23    [W:4.058 / U:1.160 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site