lkml.org 
[lkml]   [2021]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node
From
Date


On 7/19/21 12:33 PM, Bjorn Andersson wrote:
> On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote:
>
>> Add LMh nodes for cpu cluster0 and cpu cluster1. Also add interrupt
>> support in cpufreq node to capture the LMh interrupt and let the scheduler
>> know of the max frequency throttling.
>>
>
> Just noticed, could you please drop "boot: " from $subject and add the
> missing '8', as you're resubmitting the series.

Sure..

Warm Regards
Thara
>
> Regards,
> Bjorn
>
>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
>> ---
>>
>> v2->v3:
>> - Changed the LMh low and high trip to 94500 and 95000 mC from
>> 74500 and 75000 mC. This was a bug that got introduced in v2.
>> v1->v2:
>> - Dropped dt property qcom,support-lmh as per Bjorn's review comments.
>> - Changed lmh compatible from generic to platform specific.
>> - Introduced properties specifying arm, low and high temp thresholds for LMh
>> as per Daniel's suggestion.
>>
>> arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++
>> 1 file changed, 26 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> index 0a86fe71a66d..4da6b8f3dd7b 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
>> @@ -3646,6 +3646,30 @@ swm: swm@c85 {
>> };
>> };
>>
>> + lmh_cluster1: lmh@17d70800 {
>> + compatible = "qcom,sdm845-lmh";
>> + reg = <0 0x17d70800 0 0x401>;
>> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>> + qcom,lmh-cpu-id = <0x4>;
>> + qcom,lmh-temperature-arm = <65000>;
>> + qcom,lmh-temperature-low = <94500>;
>> + qcom,lmh-temperature-high = <95000>;
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> + };
>> +
>> + lmh_cluster0: lmh@17d78800 {
>> + compatible = "qcom,sdm845-lmh";
>> + reg = <0 0x17d78800 0 0x401>;
>> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>> + qcom,lmh-cpu-id = <0x0>;
>> + qcom,lmh-temperature-arm = <65000>;
>> + qcom,lmh-temperature-low = <94500>;
>> + qcom,lmh-temperature-high = <95000>;
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> + };
>> +
>> sound: sound {
>> };
>>
>> @@ -4911,6 +4935,8 @@ cpufreq_hw: cpufreq@17d43000 {
>> reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
>> reg-names = "freq-domain0", "freq-domain1";
>>
>> + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
>> +
>> clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
>> clock-names = "xo", "alternate";
>>
>> --
>> 2.25.1
>>


\
 
 \ /
  Last update: 2021-07-20 02:20    [W:0.052 / U:1.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site