lkml.org 
[lkml]   [2021]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] spi: mediatek: modify set_cs_timing callback
Date
From: Mason Zhang <Mason.Zhang@mediatek.com>

This patch modified set_cs_timing callback:
1. support spi_device set cs_timing in their driver;
2. support set absolute time but no clk count, because;
clk src will change in different platform;
3. call this function in prepare_message but not in other API.

Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
---
drivers/spi/spi-mt65xx.c | 102 +++++++++++++++++++++------------------
1 file changed, 56 insertions(+), 46 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 6f2925118b98..7a34f5b1201d 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -208,6 +208,60 @@ static void mtk_spi_reset(struct mtk_spi *mdata)
writel(reg_val, mdata->base + SPI_CMD_REG);
}

+static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
+{
+ struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
+ struct spi_delay *cs_setup = &spi->cs_setup;
+ struct spi_delay *cs_hold = &spi->cs_hold;
+ struct spi_delay *cs_inactive = &spi->cs_inactive;
+ u16 setup, hold, inactive;
+ u32 reg_val;
+ int delay;
+
+ delay = spi_delay_to_ns(cs_setup, NULL);
+ if (delay < 0)
+ return delay;
+ setup = (delay / 1000) * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000);
+
+ delay = spi_delay_to_ns(cs_hold, NULL);
+ if (delay < 0)
+ return delay;
+ hold = (delay / 1000) * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000);
+
+ delay = spi_delay_to_ns(cs_inactive, NULL);
+ if (delay < 0)
+ return delay;
+ inactive = (delay / 1000) * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000);
+
+ setup = setup ? setup : 1;
+ hold = hold ? hold : 1;
+ inactive = inactive ? inactive : 1;
+
+ reg_val = readl(mdata->base + SPI_CFG0_REG);
+ if (mdata->dev_comp->enhance_timing) {
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ } else {
+ reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xff)
+ << SPI_CFG0_CS_SETUP_OFFSET);
+ }
+ writel(reg_val, mdata->base + SPI_CFG0_REG);
+
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+ reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+
+ return 0;
+}
+
static int mtk_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -284,6 +338,8 @@ static int mtk_spi_prepare_message(struct spi_master *master,
<< SPI_CFG1_GET_TICK_DLY_OFFSET);
writel(reg_val, mdata->base + SPI_CFG1_REG);

+ /* set hw cs timing */
+ mtk_spi_set_hw_cs_timing(spi);
return 0;
}

@@ -528,52 +584,6 @@ static bool mtk_spi_can_dma(struct spi_master *master,
(unsigned long)xfer->rx_buf % 4 == 0);
}

-static int mtk_spi_set_hw_cs_timing(struct spi_device *spi,
- struct spi_delay *setup,
- struct spi_delay *hold,
- struct spi_delay *inactive)
-{
- struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
- u16 setup_dly, hold_dly, inactive_dly;
- u32 reg_val;
-
- if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
- (hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
- (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
- dev_err(&spi->dev,
- "Invalid delay unit, should be SPI_DELAY_UNIT_SCK\n");
- return -EINVAL;
- }
-
- setup_dly = setup ? setup->value : 1;
- hold_dly = hold ? hold->value : 1;
- inactive_dly = inactive ? inactive->value : 1;
-
- reg_val = readl(mdata->base + SPI_CFG0_REG);
- if (mdata->dev_comp->enhance_timing) {
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold_dly - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup_dly - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- } else {
- reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold_dly - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup_dly - 1) & 0xff)
- << SPI_CFG0_CS_SETUP_OFFSET);
- }
- writel(reg_val, mdata->base + SPI_CFG0_REG);
-
- reg_val = readl(mdata->base + SPI_CFG1_REG);
- reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
- reg_val |= (((inactive_dly - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
- writel(reg_val, mdata->base + SPI_CFG1_REG);
-
- return 0;
-}
-
static int mtk_spi_setup(struct spi_device *spi)
{
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
--
2.18.0
\
 
 \ /
  Last update: 2021-07-19 11:34    [W:0.190 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site