lkml.org 
[lkml]   [2021]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more generic
From
Date
Hi,

On 7/17/21 1:21 AM, Ismael Ferreras Morezuelas wrote:
> Turns out Hans de Goede completed the work I started last year trying to
> improve Chinese-clone detection of CSR controller chips. Quirk after quirk
> these Bluetooth dongles are more usable now.
>
> Even after a few BlueZ regressions; these clones are so fickle that some
> days they stop working altogether. Except on Windows, they work fine.
>
>
> But this force-suspend initialization quirk seems to mostly do the trick,
> after a lot of testing Bluetooth now seems to work *all* the time.
>
> The only problem is that the solution ended up being masked under a very
> stringent check; when there are probably hundreds of fake dongle
> models out there that benefit from a good reset. Make it so.
>
>
> Fixes: 81cac64ba258a ("Bluetooth: Deal with USB devices that are faking CSR vendor")
> Fixes: cde1a8a992875 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers")
> Fixes: d74e0ae7e0303 ("Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134")
> Fixes: 0671c0662383e ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers")
>
> Cc: stable@vger.kernel.org
> Cc: Hans de Goede <hdegoede@redhat.com>
> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>

FWIW I'm fine with making the force-suspend once quirk which
I added generic to all clones.

The new code looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans





> ---
>
> I've changed the warning line to make it easy to grep and detect if this updated
> workaround is part of the driver. Should make it much more obvious to users in
> case their dongle doesn't work for other reasons. There's a clear then-now.
>
> Easy to narrow other future issues down. Let me know what you think.
>
> drivers/bluetooth/btusb.c | 61 +++++++++++++++++++++------------------
> 1 file changed, 33 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index a9855a2dd..197cafe75 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -1890,7 +1890,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
> is_fake = true;
>
> if (is_fake) {
> - bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds...");
> + bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...");
>
> /* Generally these clones have big discrepancies between
> * advertised features and what's actually supported.
> @@ -1907,41 +1907,46 @@ static int btusb_setup_csr(struct hci_dev *hdev)
> clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>
> /*
> - * Special workaround for clones with a Barrot 8041a02 chip,
> - * these clones are really messed-up:
> - * 1. Their bulk rx endpoint will never report any data unless
> - * the device was suspended at least once (yes really).
> + * Special workaround for these BT 4.0 chip clones, and potentially more:
> + *
> + * - 0x0134: a Barrot 8041a02 (HCI rev: 0x1012 sub: 0x0810)
> + * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709)
> + *
> + * These controllers are really messed-up.
> + *
> + * 1. Their bulk RX endpoint will never report any data unless
> + * the device was suspended at least once (yes, really).
> * 2. They will not wakeup when autosuspended and receiving data
> - * on their bulk rx endpoint from e.g. a keyboard or mouse
> + * on their bulk RX endpoint from e.g. a keyboard or mouse
> * (IOW remote-wakeup support is broken for the bulk endpoint).
> *
> * To fix 1. enable runtime-suspend, force-suspend the
> - * hci and then wake-it up by disabling runtime-suspend.
> + * HCI and then wake-it up by disabling runtime-suspend.
> *
> - * To fix 2. clear the hci's can_wake flag, this way the hci
> + * To fix 2. clear the HCI's can_wake flag, this way the HCI
> * will still be autosuspended when it is not open.
> + *
> + * --
> + *
> + * Because these are widespread problems we prefer generic solutions; so
> + * apply this initialization quirk to every controller that gets here,
> + * it should be harmless. The alternative is to not work at all.
> */
> - if (bcdDevice == 0x8891 &&
> - le16_to_cpu(rp->lmp_subver) == 0x1012 &&
> - le16_to_cpu(rp->hci_rev) == 0x0810 &&
> - le16_to_cpu(rp->hci_ver) == BLUETOOTH_VER_4_0) {
> - bt_dev_warn(hdev, "CSR: detected a fake CSR dongle using a Barrot 8041a02 chip, this chip is very buggy and may have issues");
> -
> - pm_runtime_allow(&data->udev->dev);
> + pm_runtime_allow(&data->udev->dev);
>
> - ret = pm_runtime_suspend(&data->udev->dev);
> - if (ret >= 0)
> - msleep(200);
> - else
> - bt_dev_err(hdev, "Failed to suspend the device for Barrot 8041a02 receive-issue workaround");
> -
> - pm_runtime_forbid(&data->udev->dev);
> -
> - device_set_wakeup_capable(&data->udev->dev, false);
> - /* Re-enable autosuspend if this was requested */
> - if (enable_autosuspend)
> - usb_enable_autosuspend(data->udev);
> - }
> + ret = pm_runtime_suspend(&data->udev->dev);
> + if (ret >= 0)
> + msleep(200);
> + else
> + bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround");
> +
> + pm_runtime_forbid(&data->udev->dev);
> +
> + device_set_wakeup_capable(&data->udev->dev, false);
> +
> + /* Re-enable autosuspend if this was requested */
> + if (enable_autosuspend)
> + usb_enable_autosuspend(data->udev);
> }
>
> kfree_skb(skb);
>

\
 
 \ /
  Last update: 2021-07-17 11:32    [W:0.057 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site