lkml.org 
[lkml]   [2021]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 00/10] gpio: msc313: Add gpio support for ssd20xd
    Date
    This is a little series to add a compatible string for the Sigmastar
    SSD201 and SSD202D to the msc313 gpio driver, add the specific offsets
    for the pins on these chips, and then a bunch of DT wiring stuff so
    that the LEDs on the M5 stack unitv2 work and it can control the
    power switch for the USB connected.

    Daniel Palmer (10):
    dt-bindings: gpio: msc313: Add compatible for ssd20xd
    dt-bindings: gpio: msc313: Add offsets for ssd20xd
    gpio: msc313: Code clean ups
    gpio: msc313: Add support for SSD201 and SSD202D
    ARM: dts: mstar: Set gpio compatible for ssd20xd
    ARM: dts: mstar: unitv2: Wire up LEDs
    ARM: dts: mstar: unitv2: Add core regulator
    ARM: dts: mstar: unitv2: Add io regulator
    ARM: dts: mstar: unitv2: Add DRAM regulator
    ARM: dts: mstar: unitv2: Add wifi switch

    .../bindings/gpio/mstar,msc313-gpio.yaml | 4 +-
    .../dts/mstar-infinity2m-ssd202d-unitv2.dts | 46 +++
    .../boot/dts/mstar-infinity2m-ssd20xd.dtsi | 5 +
    drivers/gpio/gpio-msc313.c | 266 +++++++++++++++++-
    include/dt-bindings/gpio/msc313-gpio.h | 71 +++++
    5 files changed, 387 insertions(+), 5 deletions(-)

    --
    2.32.0

    \
     
     \ /
      Last update: 2021-07-17 06:58    [W:2.655 / U:0.036 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site