lkml.org 
[lkml]   [2021]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 05/10] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
On Fri, 16 Jul 2021 15:18:33 -0400
"Liam Beguin" <liambeguin@gmail.com> wrote:

> On Thu Jul 15, 2021 at 5:48 AM EDT, Peter Rosin wrote:
> >
> > On 2021-07-15 05:12, Liam Beguin wrote:
> > > From: Liam Beguin <lvb@xiphos.com>
> > >
> > > Some ADCs use IIO_VAL_INT_PLUS_{NANO,MICRO} scale types.
> > > Add support for these to allow using the iio-rescaler with them.
> > >
> > > Signed-off-by: Liam Beguin <lvb@xiphos.com>
> > > ---
> > > drivers/iio/afe/iio-rescale.c | 15 +++++++++++++++
> > > 1 file changed, 15 insertions(+)
> > >
> > > diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
> > > index 4c3cfd4d5181..a2b220b5ba86 100644
> > > --- a/drivers/iio/afe/iio-rescale.c
> > > +++ b/drivers/iio/afe/iio-rescale.c
> > > @@ -92,7 +92,22 @@ static int rescale_read_raw(struct iio_dev *indio_dev,
> > > do_div(tmp, 1000000000LL);
> > > *val = tmp;
> > > return ret;
> > > + case IIO_VAL_INT_PLUS_NANO:
> > > + tmp = ((s64)*val * 1000000000LL + *val2) * rescale->numerator;
> > > + do_div(tmp, rescale->denominator);
> > > +
> > > + *val = div_s64(tmp, 1000000000LL);
> > > + *val2 = tmp - *val * 1000000000LL;
> > > + return ret;
> >
> > This is too simplistic and prone to overflow. We need something like
> > this
> > (untested)
> >
> > tmp = (s64)*val * rescale->numerator;
> > rem = do_div(tmp, rescale->denominator);
> > *val = tmp;
> > tmp = ((s64)rem * 1000000000LL + (s64)*val2) * rescale->numerator;
> > do_div(tmp, rescale->denominator);
> > *val2 = tmp;
> >
> > Still not very safe with numerator and denominator both "large", but
> > much
> > better. And then we need normalizing the fraction part after the above,
> > of
> > course.
> >
>
> Understood, I'll test that.
>
> > And, of course, I'm not sure what *val == -1 and *val2 == 500000000
> > really
> > means. Is that -1.5 or -0.5? The above may very well need adjusting for
> > negative values...
> >
>
> I would've assumed the correct answer is -1 + 500000000e-9 = -0.5
> but adding a test case to iio-test-format.c seems to return -1.5...

No. -1.5 is as intended, though the IIO_VAL_PLUS_MICRO is rather confusing
naming :( We should perhaps add more documentation for that. Signs were
always a bit of a pain with this two integer scheme for fixed point.

The intent is to have moderately readable look up tables with the problem that
we don't have a signed 0 available. Meh, maybe this decision a long time
back wasn't a the right one, but it may be a pain to change now as too many
drivers to check!

1, 0000000 == 1
0, 5000000 == 0.5
0, 0000000 == 0
0, -5000000 == -0.5
-1, 5000000 == -1.5


>
> I believe that's a bug but we can work around if for now by moving the
> integer part of *val2 to *val.

Yup. Fiddly corner cases..

Jonathan

>
> Liam
>
> > Cheers,
> > Peter
> >
> > > + case IIO_VAL_INT_PLUS_MICRO:
> > > + tmp = ((s64)*val * 1000000LL + *val2) * rescale->numerator;
> > > + do_div(tmp, rescale->denominator);
> > > +
> > > + *val = div_s64(tmp, 1000000LL);
> > > + *val2 = tmp - *val * 1000000LL;
> > > + return ret;
> > > default:
> > > + dev_err(&indio_dev->dev, "unsupported type %d\n", ret);
> > > return -EOPNOTSUPP;
> > > }
> > > default:
> > >
>

\
 
 \ /
  Last update: 2021-07-17 18:55    [W:0.108 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site