lkml.org 
[lkml]   [2021]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH Part2 RFC v4 21/40] KVM: SVM: Add initial SEV-SNP support
From
Date

On 7/16/21 1:00 PM, Sean Christopherson wrote:
> On Wed, Jul 07, 2021, Brijesh Singh wrote:
>> diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
>> index 411ed72f63af..abca2b9dee83 100644
>> --- a/arch/x86/kvm/svm/sev.c
>> +++ b/arch/x86/kvm/svm/sev.c
>> @@ -52,9 +52,14 @@ module_param_named(sev, sev_enabled, bool, 0444);
>> /* enable/disable SEV-ES support */
>> static bool sev_es_enabled = true;
>> module_param_named(sev_es, sev_es_enabled, bool, 0444);
>> +
>> +/* enable/disable SEV-SNP support */
>> +static bool sev_snp_enabled = true;
> Is it safe to incrementally introduce SNP support? Or should the module param
> be hidden until all support is in place? E.g. what will happen when KVM allows
> userspace to create SNP guests but doesn't yet have the RMP management added?

The SNP support depends on the RMP management. At least the patch
ordering in this series adds the RMP management first then updates
drivers to use the RMP specific APIs. If RMP is not initialized due to
someone not picking the commits in the order, then SNP guest creation
will fail. This is mainly because the first thing a guest creation does
is to call the SNP_INIT. The SNP_INIT firmware command verifies that RMP
is initialized before creating the guest context etc..


>> +module_param_named(sev_snp, sev_snp_enabled, bool, 0444);
>> #else
>> #define sev_enabled false
>> #define sev_es_enabled false
>> +#define sev_snp_enabled false
>> #endif /* CONFIG_KVM_AMD_SEV */
>>
>> #define AP_RESET_HOLD_NONE 0
>> @@ -1825,6 +1830,7 @@ void __init sev_hardware_setup(void)
>> {
>> #ifdef CONFIG_KVM_AMD_SEV
>> unsigned int eax, ebx, ecx, edx, sev_asid_count, sev_es_asid_count;
>> + bool sev_snp_supported = false;
>> bool sev_es_supported = false;
>> bool sev_supported = false;
>>
>> @@ -1888,9 +1894,21 @@ void __init sev_hardware_setup(void)
>> pr_info("SEV-ES supported: %u ASIDs\n", sev_es_asid_count);
>> sev_es_supported = true;
>>
>> + /* SEV-SNP support requested? */
>> + if (!sev_snp_enabled)
>> + goto out;
>> +
>> + /* Is SEV-SNP enabled? */
>> + if (!cpu_feature_enabled(X86_FEATURE_SEV_SNP))
> Random question, why use cpu_feature_enabled? Did something change in cpufeatures
> that prevents using boot_cpu_has() here?


During the boot the kernel initialize the RMP table. If RMP table
initialization fail, then X86_FEATURE_SEV_SNP is cleared. In that case,
the cpu_feature_enabled() should return false. The idea is,
cpu_feature_enabled() will be set only when the RMP table is
successfully initialized and SYSCFG.SNP is set.


>> + goto out;
>> +
>> + pr_info("SEV-SNP supported: %u ASIDs\n", min_sev_asid - 1);
> Use sev_es_asid_count instead of manually recomputing the same; the latter
> obfuscates the fact that ES and SNP share the same ASID pool.
>
> Even better would be to report ES+SNP together, otherwise the user could easily
> interpret ES and SNP having separate ASID pools. And IMO the gotos for SNP are
> overkill, e.g.
>
> sev_es_supported = true;
> sev_snp_supported = sev_snp_enabled &&
> cpu_feature_enabled(X86_FEATURE_SEV_SNP);
>
> pr_info("SEV-ES %ssupported: %u ASIDs\n",
> sev_snp_supported ? "and SEV-SNP " : "", sev_es_asid_count);
>
Noted.


>> + sev_snp_supported = true;
>> +
>> out:
>> sev_enabled = sev_supported;
>> sev_es_enabled = sev_es_supported;
>> + sev_snp_enabled = sev_snp_supported;
>> #endif
>> }
>>
>> diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
>> index 1175edb02d33..b9ea99f8579e 100644
>> --- a/arch/x86/kvm/svm/svm.h
>> +++ b/arch/x86/kvm/svm/svm.h
>> @@ -58,6 +58,7 @@ enum {
>> struct kvm_sev_info {
>> bool active; /* SEV enabled guest */
>> bool es_active; /* SEV-ES enabled guest */
>> + bool snp_active; /* SEV-SNP enabled guest */
>> unsigned int asid; /* ASID used for this guest */
>> unsigned int handle; /* SEV firmware handle */
>> int fd; /* SEV device fd */
>> @@ -232,6 +233,17 @@ static inline bool sev_es_guest(struct kvm *kvm)
>> #endif
>> }
>>
>> +static inline bool sev_snp_guest(struct kvm *kvm)
>> +{
>> +#ifdef CONFIG_KVM_AMD_SEV
>> + struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
>> +
>> + return sev_es_guest(kvm) && sev->snp_active;
> Can't this be reduced to:
>
> return to_kvm_svm(kvm)->sev_info.snp_active;
>
> KVM should never set snp_active without also setting es_active.


The approach here is similar to SEV/ES. IIRC, it was done mainly to
avoid adding dead code when CONFIG_KVM_AMD_SEV is disabled. Most of the
function related to SEV/ES/SNP call the
sev_guest()/sev_es_guest()/sev_snp_guest() on the entry. Instead of
#ifdef all those functions, we can #ifdef sev_snp_guest(); compiler will
see that if() statement will always return false, so it will not include
the remaining body of the function.


>
> Side topic, I think it would also be worthwhile to add to_sev (or maybe to_kvm_sev)
> given the frequency of the "&to_kvm_svm(kvm)->sev_info" pattern.
>
>> +#else
>> + return false;
>> +#endif
>> +}
>> +
>> static inline void vmcb_mark_all_dirty(struct vmcb *vmcb)
>> {
>> vmcb->control.clean = 0;
>> --
>> 2.17.1
>>

\
 
 \ /
  Last update: 2021-07-16 20:48    [W:3.331 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site