lkml.org 
[lkml]   [2021]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] software node: balance refcount for managed sw nodes
Date
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

software_node_notify(), on KOBJ_REMOVE drops the refcount twice on managed
software nodes, thus leading to underflow errors. Balance the refcount by
bumping it in the device_create_managed_software_node() function.

The error [1] was encountered after adding a .shutdown() op to our
fsl-mc-bus driver.

[1]
pc : refcount_warn_saturate+0xf8/0x150
lr : refcount_warn_saturate+0xf8/0x150
sp : ffff80001009b920
x29: ffff80001009b920 x28: ffff1a2420318000 x27: 0000000000000000
x26: ffffccac15e7a038 x25: 0000000000000008 x24: ffffccac168e0030
x23: ffff1a2428a82000 x22: 0000000000080000 x21: ffff1a24287b5000
x20: 0000000000000001 x19: ffff1a24261f4400 x18: ffffffffffffffff
x17: 6f72645f726f7272 x16: 0000000000000000 x15: ffff80009009b607
x14: 0000000000000000 x13: ffffccac16602670 x12: 0000000000000a17
x11: 000000000000035d x10: ffffccac16602670 x9 : ffffccac16602670
x8 : 00000000ffffefff x7 : ffffccac1665a670 x6 : ffffccac1665a670
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1a2420318000
Call trace:
refcount_warn_saturate+0xf8/0x150
kobject_put+0x10c/0x120
software_node_notify+0xd8/0x140
device_platform_notify+0x4c/0xb4
device_del+0x188/0x424
fsl_mc_device_remove+0x2c/0x4c
rebofind sp.c__fsl_mc_device_remove+0x14/0x2c
device_for_each_child+0x5c/0xac
dprc_remove+0x9c/0xc0
fsl_mc_driver_remove+0x28/0x64
__device_release_driver+0x188/0x22c
device_release_driver+0x30/0x50
bus_remove_device+0x128/0x134
device_del+0x16c/0x424
fsl_mc_bus_remove+0x8c/0x114
fsl_mc_bus_shutdown+0x14/0x20
platform_shutdown+0x28/0x40
device_shutdown+0x15c/0x330
__do_sys_reboot+0x218/0x2a0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common+0x40/0xdc
do_el0_svc+0x2c/0x94
el0_svc+0x2c/0x54
el0t_64_sync_handler+0xa8/0x12c
el0t_64_sync+0x198/0x19c
---[ end trace 32eb1c71c7d86821 ]---

Reported-by: Jon Nettleton <jon@solid-run.com>
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
Changes since RFC:
- use software_node_notify(KOBJ_ADD) instead of directly bumping
refcount (Heikki)

drivers/base/swnode.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
index d1f1a8240120..bdb50a06c82a 100644
--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -1113,6 +1113,9 @@ int device_create_managed_software_node(struct device *dev,
to_swnode(fwnode)->managed = true;
set_secondary_fwnode(dev, fwnode);

+ if (device_is_registered(dev))
+ software_node_notify(dev, KOBJ_ADD);
+
return 0;
}
EXPORT_SYMBOL_GPL(device_create_managed_software_node);
--
2.17.1
\
 
 \ /
  Last update: 2021-07-16 12:16    [W:0.144 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site