lkml.org 
[lkml]   [2021]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 1/4] dt-bindings:drm/bridge:anx7625:add vendor define flags
On Tue, Jul 13, 2021 at 04:10:10PM -0600, Rob Herring wrote:
> On Wed, Jul 07, 2021 at 03:30:51PM +0800, Xin Ji wrote:
> > On Thu, Jun 24, 2021 at 01:57:22PM +0200, Robert Foss wrote:
> > > Hey Xin,
> > >
> > > I would like to merge this series now, but this patch needs a review
> > > first. Maybe Laurent/Rob Herring are good candidates.
> > >
> > >
> > > Rob.
> > Hi Rob, I get Laurent/Rob comments before, and explained why we needs
> > these DT properties, so far, I didn't get any response.
>
> Do I have to go dig that up? If it was more than a week ago, assume I
> don't remember. This is 1 of 100 bindings a week.
>
> Justify why this is needed in your commit message.
Hi Rob, I'll give more detail description in commit message.
>
> > Hi Rob Herring and Laurent, for the DT property lane0/1-swing, Google
> > engineer has strong demond for them, they don't want to move DP swing
> > adjusting to kernel, thus may cause change the driver code in each
> > project, so config them in DT is a best option.
>
> Where's the ack from a Google engineer?
They didn't give the review ack, but we discussed it offline. Nicolas
Boichat known this.

Thanks,
Xin
>
> >
> > Thanks,
> > Xin
> > >
> > > On Tue, 22 Jun 2021 at 14:31, Xin Ji <xji@analogixsemi.com> wrote:
> > > >
> > > > Add 'bus-type' and 'data-lanes' define for port0. Define DP tx lane0,
> > > > lane1 swing register array define, and audio enable flag.
> > > >
> > > > Signed-off-by: Xin Ji <xji@analogixsemi.com>
> > > > ---
> > > > .../display/bridge/analogix,anx7625.yaml | 57 ++++++++++++++++++-
> > > > 1 file changed, 56 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > > index ab48ab2f4240..9e604d19a3d5 100644
> > > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > > @@ -43,6 +43,26 @@ properties:
> > > > vdd33-supply:
> > > > description: Regulator that provides the supply 3.3V power.
> > > >
> > > > + analogix,lane0-swing:
> > > > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > > > + minItems: 1
> > > > + maxItems: 20
> > > > + description:
> > > > + an array of swing register setting for DP tx lane0 PHY, please don't
> > > > + add this property, or contact vendor.
>
> Why do we have the property if we're not supposed to add it.
>
> > > > +
> > > > + analogix,lane1-swing:
> > > > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > > > + minItems: 1
> > > > + maxItems: 20
> > > > + description:
> > > > + an array of swing register setting for DP tx lane1 PHY, please don't
> > > > + add this property, or contact vendor.
> > > > +
> > > > + analogix,audio-enable:
> > > > + type: boolean
> > > > + description: let the driver enable audio HDMI codec function or not.
>
> Wouldn't we have a 'port' node if audio is to be enabled?
>
> > > > +
> > > > ports:
> > > > $ref: /schemas/graph.yaml#/properties/ports
> > > >
> > > > @@ -50,13 +70,43 @@ properties:
> > > > port@0:
> > > > $ref: /schemas/graph.yaml#/properties/port
> > > > description:
> > > > - Video port for MIPI DSI input.
> > > > + MIPI DSI/DPI input.
> > > > +
> > > > + properties:
> > > > + endpoint:
> > > > + $ref: /schemas/media/video-interfaces.yaml#
> > > > + type: object
> > > > + additionalProperties: false
>
> Use 'unevaluatedProperties: false' instead...
>
> > > > +
> > > > + properties:
> > > > + remote-endpoint: true
>
> ...And drop this.
>
> > > > + bus-type: true
>
> This device supports all the possible bus types? What's the default as
> it is not required?
>
> > > > + data-lanes: true
>
> And up to 8 lanes?
>
> > > > +
> > > > + required:
> > > > + - remote-endpoint
> > > > +
> > > > + required:
> > > > + - endpoint
>
> You can drop both 'required'.
>
> > > > +
> > > >
> > > > port@1:
> > > > $ref: /schemas/graph.yaml#/properties/port
> > > > description:
> > > > Video port for panel or connector.
> > > >
> > > > + properties:
> > > > + endpoint:
> > > > + $ref: /schemas/media/video-interfaces.yaml#
>
> Doesn't look like anything from video-interfaces.yaml is used. This
> whole chunk is not needed.
>
> > > > + type: object
> > > > + additionalProperties: false
> > > > +
> > > > + properties:
> > > > + remote-endpoint: true
> > > > +
> > > > + required:
> > > > + - remote-endpoint
> > > > +
> > > > required:
> > > > - port@0
> > > > - port@1
> > > > @@ -87,6 +137,9 @@ examples:
> > > > vdd10-supply = <&pp1000_mipibrdg>;
> > > > vdd18-supply = <&pp1800_mipibrdg>;
> > > > vdd33-supply = <&pp3300_mipibrdg>;
> > > > + analogix,audio-enable;
> > > > + analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > > > + analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > > >
> > > > ports {
> > > > #address-cells = <1>;
> > > > @@ -96,6 +149,8 @@ examples:
> > > > reg = <0>;
> > > > anx7625_in: endpoint {
> > > > remote-endpoint = <&mipi_dsi>;
> > > > + bus-type = <5>;
> > > > + data-lanes = <0 1 2 3>;
> > > > };
> > > > };
> > > >
> > > > --
> > > > 2.25.1
> > > >
> >

\
 
 \ /
  Last update: 2021-07-16 07:33    [W:0.102 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site