lkml.org 
[lkml]   [2021]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1] mailbox: cmdq: add instruction time-out interrupt support
On Fri, Jul 16, 2021 at 2:58 PM Yongqiang Niu
<yongqiang.niu@mediatek.com> wrote:
>
> add time-out cycle setting to make sure time-out interrupt irq
> will happened when instruction time-out for wait and poll
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>

Hi, it seems that this series is based on
https://patchwork.kernel.org/project/linux-mediatek/patch/1624440623-4585-4-git-send-email-yongqiang.niu@mediatek.com/?

Please state it if it's not based on linux-next, thanks!

> ---
> drivers/mailbox/mtk-cmdq-mailbox.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index de4793e..9a76bcd 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -35,6 +35,7 @@
> #define CMDQ_THR_END_ADDR 0x24
> #define CMDQ_THR_WAIT_TOKEN 0x30
> #define CMDQ_THR_PRIORITY 0x40
> +#define CMDQ_THR_INSTN_TIMEOUT_CYCLES 0x50
>
> #define GCE_GCTL_VALUE 0x48
>
> @@ -53,6 +54,15 @@
> #define CMDQ_JUMP_BY_OFFSET 0x10000000
> #define CMDQ_JUMP_BY_PA 0x10000001
>
> +/*
> + * instruction time-out
> + * cycles to issue instruction time-out interrupt for wait and poll instructions
> + * GCE axi_clock 156MHz
> + * 1 cycle = 6.41ns
> + * instruction time out 2^22*2*6.41ns = 53ms
> + */
> +#define CMDQ_INSTN_TIMEOUT_CYCLES 22
> +
> struct cmdq_thread {
> struct mbox_chan *chan;
> void __iomem *base;
> @@ -368,6 +378,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
> writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa,
> thread->base + CMDQ_THR_END_ADDR);
>
> + writel(CMDQ_INSTN_TIMEOUT_CYCLES, thread->base + CMDQ_THR_INSTN_TIMEOUT_CYCLES);
> writel(thread->priority, thread->base + CMDQ_THR_PRIORITY);
> writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
> writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> --
> 1.8.1.1.dirty
>

\
 
 \ /
  Last update: 2021-07-16 09:39    [W:0.044 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site