Messages in this thread | | | From | Adam Thomson <> | Subject | RE: [PATCH v6] regulator: da9063: Add support for full-current mode. | Date | Thu, 15 Jul 2021 13:24:47 +0000 |
| |
On 13 July 2021 08:21, Vincent Pelletier wrote:
> In addition to the ability of merging some power outputs, this chip has > an overdrive mode. > BCORE1, BCORE2 and BPRO have this ability, in which case the legal > current draw is increased from 2 amps to 2.5 amps (at the expense of > a quiescent current increase), and the configurable current limits > are doubled. > If a current higher than maximum half-current mode is requested, enable > overdrive, and scale the current limit down. > Symmetrically, scale the current limit up when querying a overdrive-enabled > regulator. > > Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
| |