Messages in this thread Patch in this message | | | From | Guangbin Huang <> | Subject | [PATCH V2 net-next 1/9] devlink: add documentation for hns3 driver | Date | Thu, 15 Jul 2021 15:45:02 +0800 |
| |
From: Hao Chen <chenhao288@hisilicon.com>
Add a file to document devlink support for hns3 driver.
Now support devlink param and devlink info.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> --- Documentation/networking/devlink/hns3.rst | 56 ++++++++++++++++++++++++++++++ Documentation/networking/devlink/index.rst | 1 + 2 files changed, 57 insertions(+) create mode 100644 Documentation/networking/devlink/hns3.rst
diff --git a/Documentation/networking/devlink/hns3.rst b/Documentation/networking/devlink/hns3.rst new file mode 100644 index 000000000000..ed11a3d59c0c --- /dev/null +++ b/Documentation/networking/devlink/hns3.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +hns3 devlink support +==================== + +This document describes the devlink features implemented by the ``hns3`` +device driver. + +Parameters +========== + +The ``hns3`` driver implements the following driver-specific +parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 10 10 10 70 + + * - Name + - Type + - Mode + - Description + * - ``rx_buf_len`` + - U32 + - driverinit + - Set rx BD buffer size, now only support setting 2048 and 4096. + + * The feature is used to change the buffer size of each BD of Rx ring + between 2KB and 4KB, then do devlink reload operation to take effect. + * - ``tx_buf_size`` + - U32 + - driverinit + - Set tx bounce buf size. + + * The size is setted for tx bounce feature. Tx bounce buffer feature is + used for small size packet or frag. It adds a queue based tx shared + bounce buffer to memcpy the small packet when the len of xmitted skb is + below tx_copybreak(value to distinguish small size and normal size), + and reduce the overhead of dma map and unmap when IOMMU is on. + +The ``hns3`` driver supports reloading via ``DEVLINK_CMD_RELOAD``. + +Info versions +============= + +The ``hns3`` driver reports the following versions + +.. list-table:: devlink info versions implemented + :widths: 10 10 80 + + * - Name + - Type + - Description + * - ``fw`` + - running + - Used to represent the firmware version. diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index b3b9e0692088..03f56ed2961f 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -34,6 +34,7 @@ parameters, info versions, and other features it supports. :maxdepth: 1 bnxt + hns3 ionic ice mlx4 -- 2.8.1
| |