lkml.org 
[lkml]   [2021]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-next: manual merge of the mhi tree with the net-next tree
Hi Stephen,

On Fri, Jul 16, 2021 at 01:37:38PM +1000, Stephen Rothwell wrote:
> Hi all,
>
> Today's linux-next merge of the mhi tree got a conflict in:
>
> drivers/bus/mhi/pci_generic.c
>
> between commit:
>
> 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU")
>

Ah, this one was never submitted to "linux-arm-msm" mailing list nor to
me. I'm surprised that networking maintainers merged this patch without
getting an Ack from me as it touches MHI bus :/

> from the net-next tree and commit:
>
> 156ffb7fb7eb ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")
>
> from the mhi tree.
>
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging. You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
>

This change should've been taken via immutable branch between mhi-next
and net-next or via mhi tree. Because, we have more changes coming in for
pci-generic driver in MHI tree.

Dave, since this patch is in your tree, what do you suggest?

Thanks,
Mani

> --
> Cheers,
> Stephen Rothwell
>
> diff --cc drivers/bus/mhi/pci_generic.c
> index 19413daa0917,8bc6149249e3..000000000000
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@@ -32,7 -32,8 +32,9 @@@
> * @edl: emergency download mode firmware path (if any)
> * @bar_num: PCI base address register to use for MHI MMIO register space
> * @dma_data_width: DMA transfer word size (32 or 64 bits)
> + * @mru_default: default MRU size for MBIM network packets
> + * @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
> + * of inband wake support (such as sdx24)
> */
> struct mhi_pci_dev_info {
> const struct mhi_controller_config *config;
> @@@ -41,7 -42,7 +43,8 @@@
> const char *edl;
> unsigned int bar_num;
> unsigned int dma_data_width;
> + unsigned int mru_default;
> + bool sideband_wake;
> };
>
> #define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
> @@@ -254,7 -256,7 +258,8 @@@ static const struct mhi_pci_dev_info mh
> .config = &modem_qcom_v1_mhiv_config,
> .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> .dma_data_width = 32,
> + .mru_default = 32768
> + .sideband_wake = false,
> };
>
> static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
> @@@ -643,11 -686,13 +689,14 @@@ static int mhi_pci_probe(struct pci_de
> mhi_cntrl->status_cb = mhi_pci_status_cb;
> mhi_cntrl->runtime_get = mhi_pci_runtime_get;
> mhi_cntrl->runtime_put = mhi_pci_runtime_put;
> - mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> - mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> - mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> + mhi_cntrl->mru = info->mru_default;
>
> + if (info->sideband_wake) {
> + mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
> + mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
> + mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
> + }
> +
> err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
> if (err)
> return err;


\
 
 \ /
  Last update: 2021-07-16 05:46    [W:0.144 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site