Messages in this thread | | | Date | Fri, 16 Jul 2021 00:57:37 +0200 | From | Miquel Raynal <> | Subject | Re: [PATCH 4/4] i3c: master: svc: set ODSTOP to let I2C device see the STOP signal |
| |
Hi Clark,
Clark Wang <xiaoning.wang@nxp.com> wrote on Thu, 15 Jul 2021 16:24:13 +0800:
> If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C > devices cannot see the stop signal. It may cause message sending errors.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> > --- > drivers/i3c/master/svc-i3c-master.c | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c > index 892e57fec4b0..b05cc7f521e6 100644 > --- a/drivers/i3c/master/svc-i3c-master.c > +++ b/drivers/i3c/master/svc-i3c-master.c > @@ -449,7 +449,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) > struct i3c_device_info info = {}; > unsigned long fclk_rate, fclk_period_ns; > unsigned int high_period_ns, od_low_period_ns; > - u32 ppbaud, pplow, odhpp, odbaud, i2cbaud, reg; > + u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg; > int ret; > > /* Timings derivation */ > @@ -479,6 +479,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) > switch (bus->mode) { > case I3C_BUS_MODE_PURE: > i2cbaud = 0; > + odstop = 0; > break; > case I3C_BUS_MODE_MIXED_FAST: > case I3C_BUS_MODE_MIXED_LIMITED: > @@ -487,6 +488,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) > * between the high and low period does not really matter. > */ > i2cbaud = DIV_ROUND_UP(1000, od_low_period_ns) - 2; > + odstop = 1; > break; > case I3C_BUS_MODE_MIXED_SLOW: > /* > @@ -494,6 +496,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) > * constraints as the FM+ mode. > */ > i2cbaud = DIV_ROUND_UP(2500, od_low_period_ns) - 2; > + odstop = 1; > break; > default: > return -EINVAL; > @@ -502,7 +505,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) > reg = SVC_I3C_MCONFIG_MASTER_EN | > SVC_I3C_MCONFIG_DISTO(0) | > SVC_I3C_MCONFIG_HKEEP(0) | > - SVC_I3C_MCONFIG_ODSTOP(0) | > + SVC_I3C_MCONFIG_ODSTOP(odstop) | > SVC_I3C_MCONFIG_PPBAUD(ppbaud) | > SVC_I3C_MCONFIG_PPLOW(pplow) | > SVC_I3C_MCONFIG_ODBAUD(odbaud) |
Thanks, Miquèl
| |