lkml.org 
[lkml]   [2021]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.13 214/266] cpu/hotplug: Cure the cpusets trainwreck
    Date
    From: Thomas Gleixner <tglx@linutronix.de>

    commit b22afcdf04c96ca58327784e280e10288cfd3303 upstream.

    Alexey and Joshua tried to solve a cpusets related hotplug problem which is
    user space visible and results in unexpected behaviour for some time after
    a CPU has been plugged in and the corresponding uevent was delivered.

    cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a
    workqueue. This is done because the cpusets code has already a lock
    nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or
    waiting for the work to finish with cpu_hotplug_lock held can and will
    deadlock because that results in the reverse lock order.

    As a consequence the uevent can be delivered before cpusets have consistent
    state which means that a user space invocation of sched_setaffinity() to
    move a task to the plugged CPU fails up to the point where the scheduled
    work has been processed.

    The same is true for CPU unplug, but that does not create user observable
    failure (yet).

    It's still inconsistent to claim that an operation is finished before it
    actually is and that's the real issue at hand. uevents just make it
    reliably observable.

    Obviously the problem should be fixed in cpusets/cgroups, but untangling
    that is pretty much impossible because according to the changelog of the
    commit which introduced this 8 years ago:

    3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")

    the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and
    the whole code is built around that.

    So bite the bullet and invoke the relevant cpuset function, which waits for
    the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and
    only when tasks are not frozen by suspend/hibernate because that would
    obviously wait forever.

    Waiting there with cpu_add_remove_lock, which is protecting the present
    and possible CPU maps, held is not a problem at all because neither work
    queues nor cpusets/cgroups have any lockchains related to that lock.

    Waiting in the hotplug machinery is not problematic either because there
    are already state callbacks which wait for hardware queues to drain. It
    makes the operations slightly slower, but hotplug is slow anyway.

    This ensures that state is consistent before returning from a hotplug
    up/down operation. It's still inconsistent during the operation, but that's
    a different story.

    Add a large comment which explains why this is done and why this is not a
    dump ground for the hack of the day to work around half thought out locking
    schemes. Document also the implications vs. hotplug operations and
    serialization or the lack of it.

    Thanks to Alexy and Joshua for analyzing why this temporary
    sched_setaffinity() failure happened.

    Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")
    Reported-by: Alexey Klimov <aklimov@redhat.com>
    Reported-by: Joshua Baker <jobaker@redhat.com>
    Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
    Tested-by: Alexey Klimov <aklimov@redhat.com>
    Cc: stable@vger.kernel.org
    Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    ---
    kernel/cpu.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
    1 file changed, 49 insertions(+)

    --- a/kernel/cpu.c
    +++ b/kernel/cpu.c
    @@ -32,6 +32,7 @@
    #include <linux/relay.h>
    #include <linux/slab.h>
    #include <linux/percpu-rwsem.h>
    +#include <linux/cpuset.h>

    #include <trace/events/power.h>
    #define CREATE_TRACE_POINTS
    @@ -873,6 +874,52 @@ void __init cpuhp_threads_init(void)
    kthread_unpark(this_cpu_read(cpuhp_state.thread));
    }

    +/*
    + *
    + * Serialize hotplug trainwrecks outside of the cpu_hotplug_lock
    + * protected region.
    + *
    + * The operation is still serialized against concurrent CPU hotplug via
    + * cpu_add_remove_lock, i.e. CPU map protection. But it is _not_
    + * serialized against other hotplug related activity like adding or
    + * removing of state callbacks and state instances, which invoke either the
    + * startup or the teardown callback of the affected state.
    + *
    + * This is required for subsystems which are unfixable vs. CPU hotplug and
    + * evade lock inversion problems by scheduling work which has to be
    + * completed _before_ cpu_up()/_cpu_down() returns.
    + *
    + * Don't even think about adding anything to this for any new code or even
    + * drivers. It's only purpose is to keep existing lock order trainwrecks
    + * working.
    + *
    + * For cpu_down() there might be valid reasons to finish cleanups which are
    + * not required to be done under cpu_hotplug_lock, but that's a different
    + * story and would be not invoked via this.
    + */
    +static void cpu_up_down_serialize_trainwrecks(bool tasks_frozen)
    +{
    + /*
    + * cpusets delegate hotplug operations to a worker to "solve" the
    + * lock order problems. Wait for the worker, but only if tasks are
    + * _not_ frozen (suspend, hibernate) as that would wait forever.
    + *
    + * The wait is required because otherwise the hotplug operation
    + * returns with inconsistent state, which could even be observed in
    + * user space when a new CPU is brought up. The CPU plug uevent
    + * would be delivered and user space reacting on it would fail to
    + * move tasks to the newly plugged CPU up to the point where the
    + * work has finished because up to that point the newly plugged CPU
    + * is not assignable in cpusets/cgroups. On unplug that's not
    + * necessarily a visible issue, but it is still inconsistent state,
    + * which is the real problem which needs to be "fixed". This can't
    + * prevent the transient state between scheduling the work and
    + * returning from waiting for it.
    + */
    + if (!tasks_frozen)
    + cpuset_wait_for_hotplug();
    +}
    +
    #ifdef CONFIG_HOTPLUG_CPU
    #ifndef arch_clear_mm_cpumask_cpu
    #define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm))
    @@ -1108,6 +1155,7 @@ out:
    */
    lockup_detector_cleanup();
    arch_smt_update();
    + cpu_up_down_serialize_trainwrecks(tasks_frozen);
    return ret;
    }

    @@ -1302,6 +1350,7 @@ static int _cpu_up(unsigned int cpu, int
    out:
    cpus_write_unlock();
    arch_smt_update();
    + cpu_up_down_serialize_trainwrecks(tasks_frozen);
    return ret;
    }


    \
     
     \ /
      Last update: 2021-07-15 21:50    [W:4.087 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site