lkml.org 
[lkml]   [2021]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] drm: add crtc background color property
On Tue, 13 Jul 2021 09:54:35 -0400
Harry Wentland <harry.wentland@amd.com> wrote:

> On 2021-07-13 3:52 a.m., Pekka Paalanen wrote:
> > On Mon, 12 Jul 2021 12:15:59 -0400
> > Harry Wentland <harry.wentland@amd.com> wrote:
> >
> >> On 2021-07-12 4:03 a.m., Pekka Paalanen wrote:
> >>> On Fri, 9 Jul 2021 18:23:26 +0200
> >>> Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> wrote:
> >>>
> >>>> On 7/9/21 10:04 AM, Pekka Paalanen wrote:
> >>>>> On Wed, 7 Jul 2021 08:48:47 +0000
> >>>>> Raphael GALLAIS-POU - foss <raphael.gallais-pou@foss.st.com> wrote:
> >>>>>
> >>>>>> Some display controllers can be programmed to present non-black colors
> >>>>>> for pixels not covered by any plane (or pixels covered by the
> >>>>>> transparent regions of higher planes). Compositors that want a UI with
> >>>>>> a solid color background can potentially save memory bandwidth by
> >>>>>> setting the CRTC background property and using smaller planes to display
> >>>>>> the rest of the content.
> >>>>>>
> >>>>>> To avoid confusion between different ways of encoding RGB data, we
> >>>>>> define a standard 64-bit format that should be used for this property's
> >>>>>> value. Helper functions and macros are provided to generate and dissect
> >>>>>> values in this standard format with varying component precision values.
> >>>>>>
> >>>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >>>>>> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> >>>>>> ---
> >>>>>> drivers/gpu/drm/drm_atomic_state_helper.c | 1 +
> >>>>>> drivers/gpu/drm/drm_atomic_uapi.c | 4 +++
> >>>>>> drivers/gpu/drm/drm_blend.c | 34 +++++++++++++++++++++--
> >>>>>> drivers/gpu/drm/drm_mode_config.c | 6 ++++
> >>>>>> include/drm/drm_blend.h | 1 +
> >>>>>> include/drm/drm_crtc.h | 12 ++++++++
> >>>>>> include/drm/drm_mode_config.h | 5 ++++
> >>>>>> include/uapi/drm/drm_mode.h | 28 +++++++++++++++++++
> >>>>>> 8 files changed, 89 insertions(+), 2 deletions(-)
> >
> > ...
> >
> >>>>> The question about full vs. limited range seems unnecessary to me, as
> >>>>> the background color will be used as-is in the blending stage, so
> >>>>> userspace can just program the correct value that fits the pipeline it
> >>>>> is setting up.
> >>>>>
> >>>>> One more question is, as HDR exists, could we need background colors
> >>>>> with component values greater than 1.0?
> >>>>
> >>>> AR4H color format should cover that case, isn't it ?
> >>>
> >>> Yes, but with the inconvenience I mentioned.
> >>>
> >>> This is a genuine question though, would anyone actually need
> >>> background color values > 1.0. I don't know of any case yet where it
> >>> would be required. It would imply that plane blending happens in a
> >>> color space where >1.0 values are meaningful. I'm not even sure if any
> >>> hardware supporting that exists.
> >>>
> >>> Maybe it would be best to assume that only [0.0, 1.0] pixel value range
> >>> is useful, and mention in the commit message that if someone really
> >>> needs values outside of that, they should create another background
> >>> color property. Then, you can pick a simple unsigned integer pixel
> >>> format, too. (I didn't see any 16 bit-per-channel formats like that in
> >>> drm_fourcc.h though.)
> >>>
> >>
> >> I don't think we should artificially limit this to [0.0, 1.0]. As you
> >> mentioned above when talking about full vs limited, the userspace
> >> understands what's the correct value that fits the pipeline. If that
> >> pipeline is FP16 with > 1.0 values then it would make sense that the
> >> background color can be > 1.0.
> >
> > Ok. The standard FP32 format then for ease of use and guaranteed enough
> > range and precision for far into the future?
> >
>
> I don't have a strong preference for FP16 vs FP32. My understanding is
> that FP16 is enough to represent linearly encoded data in a way that
> looks smooth to humans.
>
> scRGB uses FP16 with linear encoding in a range of [-0.5, 7.4999].
>
> > Or do you want to keep it in 64 bits total, so the UABI can pack
> > everything into a u64 instead of needing to create a blob?
> >
> > I don't mind as long as it's clearly documented what it is and how it
> > works, and it carries enough precision.
> >
> > But FP16 with its 10 bits of precision might be too little for integer
> > 12-16 bpc pipelines and sinks?

The 10 bits worries me still.

If you have a pipeline that works in [0.0, 1.0] range only, then FP16
limits precision to 10 bits (in the upper half of the range?).

> >
> > If the values can go beyond [0.0, 1.0] range, then does the blending
> > hardware and the degamma/ctm/gamma coming afterwards cope with them, or
> > do they get clamped anyway?
> >
>
> That probably depends on the HW and how it's configured. AMD HW can handle
> values above and below [0.0, 1.0].

Right, so how would userspace know what will happen?

Or do we need to specify that while values outside that unit range are
expressable, it is hardware-specific on how they will behave, so
generic userspace should not attempt to use values outside of the unit
range?

I guess this caveat should be documented for everything, not just for
background color? LUT inputs and outputs, CTM input and output ranges,
FB formats...


Thanks,
pq
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-07-14 09:36    [W:0.078 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site