lkml.org 
[lkml]   [2021]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v4 1/7] PCI: Introduce domain_nr in pci_host_bridge
On Wed, Jul 14, 2021 at 06:27:31PM +0800, Boqun Feng wrote:
> Currently we retrieve the PCI domain number of the host bridge from the
> bus sysdata (or pci_config_window if PCI_DOMAINS_GENERIC=y). Actually
> we have the information at PCI host bridge probing time, and it makes
> sense that we store it into pci_host_bridge. One benefit of doing so is
> the requirement for supporting PCI on Hyper-V for ARM64, because the
> host bridge of Hyper-V doesn't have pci_config_window, whereas ARM64 is
> a PCI_DOMAINS_GENERIC=y arch, so we cannot retrieve the PCI domain
> number from pci_config_window on ARM64 Hyper-V guest.
>
> As the preparation for ARM64 Hyper-V PCI support, we introduce the
> domain_nr in pci_host_bridge and a sentinel value to allow drivers to
> set domain numbers properly at probing time. Currently
> CONFIG_PCI_DOMAINS_GENERIC=y archs are only users of this
> newly-introduced field.

Thanks for pushing on this. PCI_DOMAINS_GENERIC is really not very
generic today and it will be good to make it more so.

> Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
> ---
> drivers/pci/probe.c | 6 +++++-
> include/linux/pci.h | 10 ++++++++++
> 2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 79177ac37880..60c50d4f156f 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -594,6 +594,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
> bridge->native_pme = 1;
> bridge->native_ltr = 1;
> bridge->native_dpc = 1;
> + bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
>
> device_initialize(&bridge->dev);
> }
> @@ -898,7 +899,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
> bus->ops = bridge->ops;
> bus->number = bus->busn_res.start = bridge->busnr;
> #ifdef CONFIG_PCI_DOMAINS_GENERIC
> - bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
> + if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)
> + bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
> + else
> + bus->domain_nr = bridge->domain_nr;

The domain_nr in struct pci_bus is really only used by
pci_domain_nr(). It seems like it really belongs in the struct
pci_host_bridge and probably doesn't need to be duplicated in the
struct pci_bus. But that's probably a project for the future.

> #endif
>
> b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 540b377ca8f6..952bb7d46576 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -526,6 +526,15 @@ static inline int pci_channel_offline(struct pci_dev *pdev)
> return (pdev->error_state != pci_channel_io_normal);
> }
>
> +/*
> + * PCI Conventional has at most 256 PCI bus segments and PCI Express has at
> + * most 65536 "PCI Segments Groups", therefore -1 is not a valid PCI domain

s/Segments/Segment/

Do you have a reference for these limits? I don't think either
Conventional PCI or PCIe actually specifies a hardware limit on the
number of domains (I think PCI uses "segment group" to mean the same
thing).

"Segment" in the Conventional PCI spec, r3.0, means a bus segment,
which connects all the devices on a single bus. Obviously there's a
limit of 256 buses under a single host bridge, but that's different
concept than a domain/segment group.

The PCI Firmware spec, r3.3, defines "Segment Group Number" as being
in the range 0..65535, but as far as I know, that's just a firmware
issue, and it applies equally to Conventional PCI and PCIe.

I think you're right that -1 is a reasonable sentinel; I just don't
want to claim a difference here unless there really is one.

> + * number, and can be used as a sentinel value indicating ->domain_nr is not
> + * set by the driver (and CONFIG_PCI_DOMAINS_GENERIC=y can set it in generic
> + * code).
> + */
> +#define PCI_DOMAIN_NR_NOT_SET (-1)
> +
> struct pci_host_bridge {
> struct device dev;
> struct pci_bus *bus; /* Root bus */
> @@ -533,6 +542,7 @@ struct pci_host_bridge {
> struct pci_ops *child_ops;
> void *sysdata;
> int busnr;
> + int domain_nr;
> struct list_head windows; /* resource_entry */
> struct list_head dma_ranges; /* dma ranges resource list */
> u8 (*swizzle_irq)(struct pci_dev *, u8 *); /* Platform IRQ swizzler */
> --
> 2.30.2
>

\
 
 \ /
  Last update: 2021-07-14 21:33    [W:0.112 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site