lkml.org 
[lkml]   [2021]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] media: rcar-csi2: do not update format while streaming
Hi Niklas,

On Tue, Jul 13, 2021 at 11:42:17AM +0200, Niklas Söderlund wrote:
> On 2021-07-11 01:42:44 +0300, Laurent Pinchart wrote:
> > On Fri, Jul 09, 2021 at 04:20:40PM +0200, Niklas Söderlund wrote:
> > > On 2021-07-08 15:22:58 +0200, Dennis Rachui wrote:
> > > > Verify that streaming is not active before setting the pad format.
> > > >
> > > > According to the VIDIOC documentation [1] changes to the active
> > > > format of a media pad via the VIDIOC_SUBDEV_S_FMT ioctl are
> > > > applied to the underlying hardware.
> > > > In rcar-csi2 a format change only applies to hardware, when the
> > > > pipeline is started. While the device is not in use, it is therefore
> > > > okay to update the format.
> > > >
> > > > However, when the pipeline is active, this leads to a format
> > > > mismatch between driver and device.
> > > > Other applications can query the format with
> > > > VIDIOC_SUBDEV_G_FMT at any time and would be reported
> > > > a format that does not fit the current stream.
> > > >
> > > > This commit prevents format update while streaming is active
> > > > and returns -EBUSY to user space, as suggested by [1].
> > > >
> > > > [1] Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
> > >
> > > I like that this is addressed, but I wonder is this not something that
> > > should be fixed in the V4L2 core and not in drivers?
> >
> > Some drivers may support format changes during streaming (that's allowed
> > by the V4L2 API, I'm not sure if it's used anywhere though). While I'd
> > favour not duplicating the same logic in different (and differently
> > buggy) ways in drivers, I'm not sure how this could be implemented in a
> > sane way in the V4L2 core in its current state.
>
> I understand it's possible from some devices to support to format
> changes during streaming, but as you point out it's the exception and
> not the rule, if used at all.
>
> So my point is if we start to enforce this in drivers we are headed down
> a road where this will be messier to clean up. Would it not make more
> sens to default the V4L2 core to disallow format changes while streaming
> and add a new flag to V4L2_SUBDEV_CAP_ to signal that the subdevice
> supports format changes while streaming?
>
> We already have V4L2_SUBDEV_CAP_RO_SUBDEV to signal that a subdevice
> only supports read-only operations so I think it would not be too hard
> to move this functionality into the core?

Yes, that's something we could try. The subdev core will then need to
track the streaming state, which may require wrapping the .s_stream()
call. Locking should then also likely be handled by the core. Probably
nothing impossible, but quite a bit of work. Any volunteer ? :-)

> > > > Note: after creation of this commit, it was noticed that Steve
> > > > Longerbeam has a very similar solution in his fork.
> > > >
> > > > Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
> > > > Cc: Steve Longerbeam <slongerbeam@gmail.com>
> > > > Signed-off-by: Dennis Rachui <drachui@de.adit-jv.com>
> > > > ---
> > > > drivers/media/platform/rcar-vin/rcar-csi2.c | 21 ++++++++++++++++++++-
> > > > 1 file changed, 20 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > > index e28eff0..98152e1 100644
> > > > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > > @@ -724,18 +724,37 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> > > > {
> > > > struct rcar_csi2 *priv = sd_to_csi2(sd);
> > > > struct v4l2_mbus_framefmt *framefmt;
> > > > + int ret = 0;
> > > > +
> > > > + mutex_lock(&priv->lock);
> > > >
> > > > if (!rcsi2_code_to_fmt(format->format.code))
> > > > format->format.code = rcar_csi2_formats[0].code;
> > > >
> > > > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > > > +
> > > > + /*
> > > > + * Do not apply changes to active format while streaming.
> > > > + *
> > > > + * Since video streams could be forwarded from sink pad to any
> > > > + * source pad (depending on CSI-2 channel routing), all
> > > > + * media pads are effected by this rule.
> > > > + */
> > > > + if (priv->stream_count > 0) {
> > > > + ret = -EBUSY;
> > > > + goto out;
> > > > + }
> > > > +
> > > > priv->mf = format->format;
> > > > } else {
> > > > framefmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > > > *framefmt = format->format;
> > > > }
> > > >
> > > > - return 0;
> > > > +out:
> > > > + mutex_unlock(&priv->lock);
> > > > +
> > > > + return ret;
> > > > }
> > > >
> > > > static int rcsi2_get_pad_format(struct v4l2_subdev *sd,

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-07-14 20:41    [W:0.352 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site