lkml.org 
[lkml]   [2021]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] x86: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
Date
The TI part is equivalent to the NXP part, and its compatible value is
not documented in the DT bindings.

Note that while the Linux driver DT match table does not contain the
compatible value of the TI part, it could still match to this part, as
i2c_device_id-based matching ignores the vendor part of the compatible
value.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
v3:
- Add Reviewed-by,

v2:
- New.
---
arch/x86/platform/ce4100/falconfalls.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
index 0ac3d43571361112..65fa3d866226ce97 100644
--- a/arch/x86/platform/ce4100/falconfalls.dts
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -249,7 +249,7 @@ i2c@1 {

gpio@26 {
#gpio-cells = <2>;
- compatible = "ti,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
};
@@ -263,7 +263,7 @@ i2c@2 {

gpio@26 {
#gpio-cells = <2>;
- compatible = "ti,pcf8575";
+ compatible = "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
};
--
2.25.1
\
 
 \ /
  Last update: 2021-07-14 13:23    [W:0.024 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site