lkml.org 
[lkml]   [2021]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 7/7] dt-bindings: adin1100: Add binding for ADIN1100 Ethernet PHY
Date
From: Alexandru Tachici <alexandru.tachici@analog.com>

DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
.../devicetree/bindings/net/adi,adin1100.yaml | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml

diff --git a/Documentation/devicetree/bindings/net/adi,adin1100.yaml b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
new file mode 100644
index 000000000000..14943164da7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1100 PHY
+
+maintainers:
+ - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description:
+ Bindings for Analog Devices Industrial Low Power 10BASE-T1L Ethernet PHY
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+properties:
+ adi,disable-2400mv-tx-level:
+ description:
+ Prevent ADIN1100 from using the 2.4 V pk-pk transmit level.
+ type: boolean
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@e000c000 {
+ compatible = "cdns,zynq-gem", "cdns,gem";
+ reg = <0xe000c000 0x1000>;
+ status = "okay";
+ phy-mode = "mii";
+ interrupts = <0 45 4>;
+ clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ reg = <0>;
+ device_type = "ethernet-phy";
+ adi,disable-2400mv-tx-level;
+ };
+
+ };
--
2.25.1
\
 
 \ /
  Last update: 2021-07-12 14:59    [W:1.320 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site