lkml.org 
[lkml]   [2021]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 9/9] gpio: gpio-aspeed-sgpio: Return error if ngpios is not multiple of 8.
Date
Add an else-if condition in the probe function to check whether ngpios is
multiple of 8.
Per AST datasheet, numbers of available serial GPIO pins in Serial GPIO
Configuration Register must be n bytes. For instance, if n = 1, it means
AST SoC supports 8 GPIO pins.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/gpio/gpio-aspeed-sgpio.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c
index b3d05fc724f0..191b82a2560c 100644
--- a/drivers/gpio/gpio-aspeed-sgpio.c
+++ b/drivers/gpio/gpio-aspeed-sgpio.c
@@ -537,6 +537,10 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
if (rc < 0) {
dev_err(&pdev->dev, "Could not read ngpios property\n");
return -EINVAL;
+ } else if (nr_gpios % 8) {
+ dev_err(&pdev->dev, "Number of GPIOs not multiple of 8: %d\n",
+ nr_gpios);
+ return -EINVAL;
}

rc = device_property_read_u32(&pdev->dev, "bus-frequency", &sgpio_freq);
--
2.17.1
\
 
 \ /
  Last update: 2021-07-12 12:10    [W:0.154 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site